I wouldn't suggest that as a solution. It's a workaround. Why should I have to use a static IP address and set the mask manually to be able disable the DHCP Server on the WAP. Again, wouldn't...

@TP-Link Just some progress here. I set the static IP address in the WAP's Network-->LAN settings and with the correct subnet mask (custom) 255.255.255.224 (I'm not using a /24) being served out for...

@TP-Link Sure, here is a video clip. I've used two different browsers, Microsoft Edge (chromium) and Mozilla Firefox. Same results. I've also flashed the latest version of the firmware for v2.0 of...

@TP-Link I've tried a hardware reset and then connected to the admin page on the WAP and tried to disable the DHCP server. Same issue. A message appears stating Failed when trying to disable the DHCP...

@Ivaylo I didn't have to update the firmware to the latest version when I bought the WAP. The firmware was already up to date out of the box. Having said that, I might try the hard reset and see if...

@Ivaylo Thanks for that info. Yes, it seems dormant at the moment set to auto and not serving out IP addresses on a single network setup. But I would prefer to be able to turn it off completely. I...