Bricked RE210

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Bricked RE210

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Bricked RE210
Bricked RE210
2017-08-20 03:42:01
Model :

Hardware Version :

Firmware Version :

ISP :

Hello all.

Please, can somebody help me with this? I have tried to upgrade my RE210 Extender firmware and something went wrong and I bricked my device.

How can I recover its firmware and make my RE210 work again? I turn it on and it just blinks its power led. When I plug it through LAN connector it show an extrange IP: 169.254.205.94

I have seen a solution for routers http://www.tp-link.com/sa/faq-1482.html But is there a similar solution for RE210?

Thank you!

Erico Serravite.
  0      
  0      
#1
Options
2 Reply
Re:Bricked RE210
2017-08-21 14:04:29
That router recovery solution is not suitable for range extender. Try reset the extender several times to see if it will recover
  0  
  0  
#2
Options
Re:Bricked RE210
2017-08-22 06:21:36
Hello Shield101,

I have tried many times to reset with no luck. I will try to recover by reflashing its firmware through serial port. I will need to solder a bar of pins and communicate with it using a serial port RS232 using putty and other tools.
I disassembled the unit to figure out how to fix it. I suppose JP1 is the entry point for RX TX GND and Power serial communication. As the unit is not working I will try to fix it.











  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1522

Replies: 2

Related Articles