Range extender wont connect with Mac filtering
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Range extender wont connect with Mac filtering
Model :
Hardware Version :
Firmware Version :
ISP :
Hi.
First time post
I have an Archer D7 and recently bought an AC750 range extender. After trying at a different location/network it worked fine but it does not work on my own system. I've nailed it down to mac address filtering in the D7. If I switch it off, the AC750 works fine. So my question is how do I get around it. Surely I don't have to copy the entire list of addresses to the AC750 for both frequencies. My understanding was the extender is just a mirror of the router
Cheers
Hardware Version :
Firmware Version :
ISP :
Hi.
First time post
I have an Archer D7 and recently bought an AC750 range extender. After trying at a different location/network it worked fine but it does not work on my own system. I've nailed it down to mac address filtering in the D7. If I switch it off, the AC750 works fine. So my question is how do I get around it. Surely I don't have to copy the entire list of addresses to the AC750 for both frequencies. My understanding was the extender is just a mirror of the router
Cheers
