Archer D9 5Ghz Issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer D9 5Ghz Issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer D9 5Ghz Issue
Archer D9 5Ghz Issue
2016-03-14 13:46:16
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hello

Model Number: TP-LINK Archer D9
Hardware Version: Version 1
Firmware Version: 0.9.1 0.1 v0041.0 Build 150826 Rel.42046n

i have purchased archer d9 few days ago .. but when i connected to 5ghz network i noticed my link speed is just 173.3 Mbps ( on channel 36 to 48 ) & 400 Mbps ( on channel 149 to 161 ). why i never get 867 Mbps Link Speed .. im just sitting next to the router ( Signal Strength is -30 dBm) ? i have also tried to set fixed Channel and Channel Width to 80MHz but issue not resolved.. but noticed that .. when i set fixed channel to 36 somehow inSSIDer software shows it on channel 40 and when set to channel 149 inSSIDer software shows it on channel 161..
I would like to know if there is any way to fix 5Ghz issue or my archer d9 is defective ?

Software used for Wi-Fi analysis - inSSIDer 4
Wi-Fi Adapter - TP-Link Archer T4U and Intel Wireless-AC 7260
  0      
  0      
#1
Options
10 Reply
Re:Archer D9 5Ghz Issue
2016-03-16 06:07:11
This problem with the D9 firmware has been previously identified. We are waiting for revised firmware.
  0  
  0  
#2
Options
Re:Archer D9 5Ghz Issue
2016-03-18 09:37:42

Sparks wrote

This problem with the D9 firmware has been previously identified. We are waiting for revised firmware.

Thank you for your reply sparks :) .... have you tested new firmware build 160303 yet ?
  0  
  0  
#3
Options
Re:Archer D9 5Ghz Issue
2016-03-19 01:10:42
Have just tested 160303. LED indicator problem is solved. WiFi channel control problem solved, except only 5GHz channels 36-48 are available. Issues remain with regional settings vs. WiFi channels, but perhaps that is too much to ask....... More work required by TP-Link, but at least this firmware is useable.
  0  
  0  
#4
Options
Re:Archer D9 5Ghz Issue
2016-03-20 09:51:05

Sparks wrote

Have just tested 160303. LED indicator problem is solved. WiFi channel control problem solved, except only 5GHz channels 36-48 are available. Issues remain with regional settings vs. WiFi channels, but perhaps that is too much to ask....... More work required by TP-Link, but at least this firmware is useable.

cool .. hey do you have this issue after upgrading ( for example .. some unknown phone device showing in computer network map ..... but don't show in router network Clients )
  0  
  0  
#5
Options
Re:Archer D9 5Ghz Issue
2016-03-24 04:21:16
Hi,

Can you please elaborate on the Archer D9 firmware issues for me please. I'm new to the D9 and want to know whether to upgrade the firmware or not. I'm currently using Archer D9_V1_150514 as I saw Error (pkts) in newer firmware. Haven't tried 160303 as I can't downgrade if I don't like it.
I'm trying to amass some info so I can make an educated decision.
Finding searching the forums a little daunting and confusing.

Thanks in advance.
Radar
  0  
  0  
#6
Options
Re:Archer D9 5Ghz Issue
2016-03-24 07:57:34
The Error display on the older firmware never worked, but it does work now on the newer firmware. The errors now displayed were most likely occurring before but not showing. Whether the new firmware is better or worse, I have not been able to determine due to other overriding bugs. We have removed the D9s from service until we obtain better firmware.
  0  
  0  
#7
Options
Re:Archer D9 5Ghz Issue
2016-03-24 17:40:15
Thanks for the reply.
I'll hold fire again and browse the forums if and when a new firmware is released whether it is any better.
  0  
  0  
#8
Options
Re:Archer D9 5Ghz Issue
2016-03-29 04:46:45

Sparks wrote

The Error display on the older firmware never worked, but it does work now on the newer firmware. The errors now displayed were most likely occurring before but not showing. Whether the new firmware is better or worse, I have not been able to determine due to other overriding bugs. We have removed the D9s from service until we obtain better firmware.


Looks like Firmware Build 160303 has been withdrawn from the site?
Hopefully a newer better one will follow soon.
Sticking with 150514 for now.
  0  
  0  
#9
Options
Re:Archer D9 5Ghz Issue
2016-08-30 19:53:51

Radar wrote

Looks like Firmware Build 160303 has been withdrawn from the site?
Hopefully a newer better one will follow soon.
Sticking with 150514 for now.


Firmware 160303 has reappeared. Is this different too the last one that was pulled?? I'm guessing not. But if it is has anyone tried it to see if it addresses any of the previous firmware problems?

I'm currently sticking with 150514.
  0  
  0  
#10
Options
Re:Archer D9 5Ghz Issue
2016-08-31 17:09:03
I'm reliably informed by forum user Sparks that the firmware that has reappeared is identical to the previous 030316 that was puller by TP-Link.

Not sure whats going on but they really need to get their act together.

Spend more time fixing firmware and less on website rebranding please.
  0  
  0  
#11
Options

Information

Helpful: 0

Views: 1206

Replies: 10

Related Articles