Unable to access my WA801ND v2.1 configuration page
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Unable to access my WA801ND v2.1 configuration page
Model : TL-WA801ND
Hardware Version : V2
Firmware Version : Unsure
ISP : Not relevant
I've been unable to configure my WA801ND through the use of the ehternet port on the back. I'm trying to use it in client mode to act as a internet adapter for the building's wireless network. These are the things i've done so far; disabled both windows firewall and AVG antivirus, i've also gone into the (TCP/ipv4) configuration of my Realtek PCIe BGE Family Controller and changed my static ip to 192.168.0.2 with the standard subnet mask of 255.255.255.0, i've also tried setting the AP's default ip (192.168.0.254) as the gateway but doing this made no difference. Any help would be greatly appreciated
Note: i've tried changing my static ip to several different ip's in the same range as the router, 192.168.0.1 and 192.168.0.100 have been tried aswell
Hardware Version : V2
Firmware Version : Unsure
ISP : Not relevant
I've been unable to configure my WA801ND through the use of the ehternet port on the back. I'm trying to use it in client mode to act as a internet adapter for the building's wireless network. These are the things i've done so far; disabled both windows firewall and AVG antivirus, i've also gone into the (TCP/ipv4) configuration of my Realtek PCIe BGE Family Controller and changed my static ip to 192.168.0.2 with the standard subnet mask of 255.255.255.0, i've also tried setting the AP's default ip (192.168.0.254) as the gateway but doing this made no difference. Any help would be greatly appreciated
Note: i've tried changing my static ip to several different ip's in the same range as the router, 192.168.0.1 and 192.168.0.100 have been tried aswell
