Region : Germany

Model : TL-WDR3600

Hardware Version : V1

Firmware Version : 3.14.1

ISP : Telekom

Hello,

i use the wdr3600 only for extending my LAN with WDS. The root AP is a TD-W9980B. The WDS Setup works fine.

The Problem is that the WDR3600 can't get an NTP Server in this config. The TD-W9980B and the WDR3600 only connected over WDS. If i try to get the time from the time Server (for eg. ptbtime1.ptb.de) I only got the error code 5028.

The WDR3600 have an static IP address. After short looking i found that the Default route is as follow:

ID Destination Network Subnet Mask Gateway Interface
1 192.168.1.0 255.255.255.0 0.0.0.0 LAN & WLAN

So I Think the Gateway should be my TD-W9980B, or? But i can't find an Option for Setting the Default Gateway for the LAN Interface.

Maybe someone could help me?

Thank you in advance.