Archer C7 V1 bricked after firmware update
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C7 V1 bricked after firmware update
Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Hi
I had issues with the wifi performance - random speed on 2,4 GHz and no service on 5 GHz, so I decided to update the firmware. The device was updated successfully and restarted, and after that I haven't been able to connect to the device. I tried both 192.168.1.1 (which was the address I used before) and http://tplinklogin.net, with a computer connected with ethernet cable, but I cannot get any response.
I then restarted the device - pressing the reset button for 15 seconds, and after that I can still not connect, but i can see 2 new wifi networks: TP-LINK_5GHz_2DACEB and TP-LINK_2.4GHz_2DACEA, but I don't know the passwords to any of the netorks, so I can't connect to them either.
How can I get the device to work again?
Best regards
Jens
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Hi
I had issues with the wifi performance - random speed on 2,4 GHz and no service on 5 GHz, so I decided to update the firmware. The device was updated successfully and restarted, and after that I haven't been able to connect to the device. I tried both 192.168.1.1 (which was the address I used before) and http://tplinklogin.net, with a computer connected with ethernet cable, but I cannot get any response.
I then restarted the device - pressing the reset button for 15 seconds, and after that I can still not connect, but i can see 2 new wifi networks: TP-LINK_5GHz_2DACEB and TP-LINK_2.4GHz_2DACEA, but I don't know the passwords to any of the netorks, so I can't connect to them either.
How can I get the device to work again?
Best regards
Jens
