Ax 53 with prelease firmware 1.31 cause shutdown all network

Ax 53 with prelease firmware 1.31 cause shutdown all network

Ax 53 with prelease firmware 1.31 cause shutdown all network
Ax 53 with prelease firmware 1.31 cause shutdown all network
Monday
Model: Archer AX53  
Hardware Version: V1
Firmware Version: 1.3.1 Build 20241120

I set up a easymesh with 

main: ax55 v1 office firmware

statelite : ax73 offfice firmware, ax53 firmware above 

when connect ax53 with ethernetbackhaul for someday the network still normal but it suddenly caused corrupt network 

The problem only solve when change ax53 to easymesh wireless 

 

  0      
  0      
#1
Options
1 Reply
Re:Ax 53 with prelease firmware 1.31 cause shutdown all network
Tuesday

Hi @Hungngo,

For your issue, please try the following troubleshootings and help us collect information:

  • When the issue occurs, does the entire network corrupt or disconnect, or is it just the Archer AX53 that is disconnected?
  • What is the LED status, and what are error message?
  • Did the problem occur after you updated to the pre-release firmware?
  • Swap the physical locations of two satellite routers for comparison?
  • Remove the Archer AX73(the other satellite router) and check will the issue persist?

 

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 40

Replies: 1

Related Articles