RE505X haven't update new firmware pass 2 year
RE505X run normally but pass 1 week start somthing odd RE505X run slow down suddenly.
Maybe TP link fault didn't update for RE505X new firmware WPA3 and WPA-2/WPA-3.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi@AF63,
For slow speed issue, please try the following suggestions:
1. First of all, we recommend using the http://www.speedtest.net for testing speed accurately. Speedtest APP/CLI tools (https://www.speedtest.net/apps/) would be better.
Please send here the screenshots with test result.
2. Before testing speed, make sure your Laptop/Phone is connected to the 5GHz Wi-Fi network of the Range Extender, not the 2.4GHz one, not the host Router Wi-Fi network. It would be better to use a separated SSID on the Range Extender.
3. If the signal light on the Range Extender is red, please move the Range Extender closer to the host Router to receive better wireless signal. Put the Range Extender in open space instead of closet or cabinet.
4. Connect to the Wi-Fi network of the host Router, run a speedtest for comparison.
- Copy Link
- Report Inappropriate Content
@Joseph-TP Yesterday reboot RE505X test speed run good, today suddenly slow down.
- Copy Link
- Report Inappropriate Content
@Joseph-TP Update RE505X new firmware Easymesh and WPA-3.
Do it.
- Copy Link
- Report Inappropriate Content
Agreed! Update with WPA3 and make Easy Mesh/One Mesh compatible with modems like T-Mobile's TMO G4AR.
Or make me buy a new, updated extender that's NOT TP-Link!
AF63 wrote
RE505X run normally but pass 1 week start somthing odd RE505X run slow down suddenly.
Maybe TP link fault didn't update for RE505X new firmware WPA3 and WPA-2/WPA-3.
- Copy Link
- Report Inappropriate Content
Hi @AF63,
When the speed of RE505X turns down, please turn off the RE505X and test the Wi-Fi speed of the router at the RE505X's location.
Please do the speed test without doing any high bandwidth behaviors.
a. In the RE's position, check the wireless speed of the phone connected to the router's 5G.
b. In the RE's position, check the wireless speed of the phone connected to RE's 5G.
- Copy Link
- Report Inappropriate Content
@Joseph-TP Not helping, you making worst.
Reboot or 5G turn off turn on is ihopeless.
Only thing is update new firmware Easymesh with WPA-3
- Copy Link
- Report Inappropriate Content
Hi @AF63,
Sorry that we don't get advanced notice of whether there will be new updates being released. But I'll make sure to log this feature request and pass it along to the team. We recommend keeping an eye on our official website for any new firmware updates if there would be any.
If you have done all troubleshootings that you can do, it is recommended that you can contact local support for further help.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 136
Replies: 7
Voters 0
No one has voted for it yet.