Home Network Community > All Threads > Deco X50 PoE per LAN-Kabel statt WLan
< All Threads

Deco X50 PoE per LAN-Kabel statt WLan

Deco X50 PoE per LAN-Kabel statt WLan

Deco X50 PoE per LAN-Kabel statt WLan
Deco X50 PoE per LAN-Kabel statt WLan
Yesterday

Hallo zusammen, 

ich habe 3 Deco X50 PoE in meinem Haus verteilt. Der Plan war, dass alle Decos per Kabel miteinander verbunden sind und nicht per Funk.

 

Laut App sind nun 2 Decos per Kabel

vernetzt und die dritte per WLAN. 
 

setup: 2 Decos direkt am Router angeschlossen, 1Deco ist über einen Switch am Router angeschlossen. Letztere ist "nur" über WLAN verbunden. 
 

Als Betriebsweise habe ich "Accesspoint" gewählt!
 

Habt ihr eine Idee, warum nicht beide ihre Daten über den Kabelanschluss erhalten?

 

Danke im Voraus und viele Grüße!

 

  1      
 
  1      
 
#1
Options
2 Reply
Re:Deco X50 PoE per LAN-Kabel statt WLan
Yesterday

  @El_wood 

Hi, welcome to the community.

Can I have the model number of the switch?

-Did all three X50-POEs units power on via POE by this switch? or do They all use individual power adapters?

-If it is via a power adapter, In case it is due to the switch, if possible, you could connect the 3rd x50-PoE directly via an Ethernet cable to the 2nd or 1st X50-PoE.

 

By the way, can I have the firmware version of the X50-POE?

Wait for your reply and best regards.

 

 

▶Deco BE65/85/95 New Firmware Versions Ready for Test ▶Deco M5 Newly Introduced Advanced Parental Control Features ▶Meet Us at CES 2025! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco X50 PoE per LAN-Kabel statt WLan
15 hours ago

  @David-TP 

Hi David, 

Thank you for your feedback.
The switch is a TL-SG108PE.

The two X50-Poe, which are connected to each other by cable, are connected directly to the router and use power adaptors. The third x50-Poe is connected to the above-mentioned TL-SG108PE and supplied with power via Poe.

The firmware is in version 1.4.4 Build 20240821 Rel. 72028.

I have connected all three x50-poe to the router in the meantime, the result is unchanged. The x50 are now all 3 supplied here via the power adaptor. Best regards!

  0  
  0  
#3
Options

Information

Helpful: 1

Views: 21

Replies: 2

Related Articles
Deco X50 PoE
509 0
Deco X50-PoE & X50 Outdoor
470 0
All Deco X50-POE Off-Line
411 1
Deco X50-POE on cascade
162 0
Problem of Deco x50 Poe
158 0
Verbindung via LAN-Kabel
603 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.