How to make "wireless lan" between two 702n Routers.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to make "wireless lan" between two 702n Routers.
Region : Russia
Model : TL-WR702N
Hardware Version : V1
Firmware Version :
ISP :
Hello, so basically I want to make “wireless lan” between two devices with lan output.
I have two 702n routers. One router NEED to work as a client. Other I don’t care I just need to see the first device.
Ok so now im connecting the first 702n router to my device trough lan port. Router set up to CLIENT MODE, and ip address of device is set manually (I cannot change the device setting to take ip automatically because its IP CAMERA) 192.168.1.20 subnet 255.255.255.0 gateway (the client mode router ip that I connected)
Ok second device is my computer. I connected 702n router again trough LAN port. What mode should I make? Access point ? I tried it. Doesn’t work. First router connects to this acess point. From computer I can ping the client mode router and my router that connected to computer but I cannot ping the ip camera. Why?
P.S I connected the camera with 702n client mode to cisco router. I can ping it and it works good, but I don’t need so huge router for it.
Sorry for my bad English. If you don’t understand something I can draw a scheme.
Model : TL-WR702N
Hardware Version : V1
Firmware Version :
ISP :
Hello, so basically I want to make “wireless lan” between two devices with lan output.
I have two 702n routers. One router NEED to work as a client. Other I don’t care I just need to see the first device.
Ok so now im connecting the first 702n router to my device trough lan port. Router set up to CLIENT MODE, and ip address of device is set manually (I cannot change the device setting to take ip automatically because its IP CAMERA) 192.168.1.20 subnet 255.255.255.0 gateway (the client mode router ip that I connected)
Ok second device is my computer. I connected 702n router again trough LAN port. What mode should I make? Access point ? I tried it. Doesn’t work. First router connects to this acess point. From computer I can ping the client mode router and my router that connected to computer but I cannot ping the ip camera. Why?
P.S I connected the camera with 702n client mode to cisco router. I can ping it and it works good, but I don’t need so huge router for it.
Sorry for my bad English. If you don’t understand something I can draw a scheme.
