Mot de passe connexion
Bonjour
J'ai essayé à plusieurs reprise de connecter mon appareil RE305.
Le problème est toujours le même : mot de passe de connexion invalide.
J'ai essayé admin sans succès.
J'avoue j'ai les nerfs, ça fait 3 jours que je cherche ! Après 2 ans d'abandon !
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
HI @Poupounou57_,
According to the translation of Google Translate, I think that your question is to set up RE305. If there is any discrepancy, please describe it in English.
If you cannot configure the TP-Link range extender successfully, please refer to the situations below to troubleshoot.
Case 1: The extender's default Wi-Fi network (TP-Link_Extender_XXXX) doesn't appear.
a. Press the RESET button (hole) with a pin for 1 second (all lights on the extender would flash) to return the extender to factory default.
b. Put your device next to the extender.
Case 2: Can't find the host router's Wi-Fi during setup.
a. Put the Range Extender close to the host router.
b. Ensure the host router's Wi-Fi is not hidden. If it's hidden, you may manually input the Wi-Fi SSID/password for the Extender.
c. Change the router's 2.4G Wi-Fi channel to 1/6/11 and 5G to 36/40/44/48. You may refer to this link or contact router support to change: Changing Channel and Channel Width on a TP-Link Router (new logo)
d. Reboot both the host router and the extender, and try again.
- Copy Link
- Report Inappropriate Content
HI @Poupounou57_,
According to the translation of Google Translate, I think that your question is to set up RE305. If there is any discrepancy, please describe it in English.
If you cannot configure the TP-Link range extender successfully, please refer to the situations below to troubleshoot.
Case 1: The extender's default Wi-Fi network (TP-Link_Extender_XXXX) doesn't appear.
a. Press the RESET button (hole) with a pin for 1 second (all lights on the extender would flash) to return the extender to factory default.
b. Put your device next to the extender.
Case 2: Can't find the host router's Wi-Fi during setup.
a. Put the Range Extender close to the host router.
b. Ensure the host router's Wi-Fi is not hidden. If it's hidden, you may manually input the Wi-Fi SSID/password for the Extender.
c. Change the router's 2.4G Wi-Fi channel to 1/6/11 and 5G to 36/40/44/48. You may refer to this link or contact router support to change: Changing Channel and Channel Width on a TP-Link Router (new logo)
d. Reboot both the host router and the extender, and try again.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 17
Replies: 1
Voters 0
No one has voted for it yet.