Early Access Archer AX53 & AX58 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More
We’re excited to announce the pre-release of the Archer AX53/AX58 V1 firmware update, version V1.3.1. This update introduces a host of new features, performance enhancements, and security improvements for a smoother and more reliable network experience. Below is a summary of the key updates.
This Article Applies to:
Archer AX53 V1
Archer AX58 V1
New Features and Modifications:
-
EasyMesh Ethernet Backhaul
The new firmware introduces full EasyMesh support, enabling seamless integration between multiple devices for consistent coverage across your home. The addition of Ethernet Backhaul ensures more stable and faster connections by allowing mesh nodes to connect via wired networks, alleviating congestion on Wi-Fi bands and improving overall network performance.
-
VPN Client and WireGuard Support
This update adds VPN client functionality with the inclusion of the WireGuard protocol, allowing users to set up and manage their VPN connections directly from the TP-Link router. This enhances privacy and provides faster speeds for your internet browsing.
*Note: L2TP/IPSec client support is not included.
-
IoT Network Segmentation
A major addition to this update is the IoT Network feature. This allows you to manage your smart devices more effectively by isolating them from the main network. This improves both the security and performance of your network, keeping your primary network efficient and less congested.
-
Local DNS Server Configuration
With this update, users can now configure local DNS servers directly in the WAN/Internet settings page. This flexibility allows you to select DNS providers that best suit your privacy and performance needs, bypassing default ISP settings. This can result in faster browsing speeds and enhanced security.
-
Advanced AP Mode
AP mode now includes a range of advanced features, such as wireless scheduling, access controls, and enhanced device management. This gives users more flexibility to control their network setup, allowing for easy configuration of security settings, parental controls, and device monitoring, even in access point mode.
-
Flow Control Switch
For advanced users, a new Flow Control ON/OFF switch has been added under Advanced > Network > LAN > Flow Controller. This feature allows more granular control over network traffic management.
-
More Enhancements
- Enhanced device stability.
- Enhanced device security.
- Improved the accuracy of client identification with Fing Integration.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
(4) This pre-release firmware for Archer AX53/AX58 V1 can be applied to all versions (EU/US/TW/etc.).
(5) This version of software can be degraded to the previous version.
Direct Firmware Download link:
Archer AX53&AX58_V1_1.3.1 Build 20241120 (Pre-release Software)
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue to improve and provide the best possible products and support.
- Model and firmware version of your router.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Related Articles:
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
How to set up WireGuard VPN on TP-Link wireless router
How to set up IoT Network on TP-Link wireless router
Introducing Fing Integration: Enhanced Client Recognition for Archer Routers and Deco Mesh Systems
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Кевин_З Спасибо огромное команде TP-Link!!!За поддержку и обновление Archer AX53.Порадовало добавление функции клиент VPN.Что на сегодняшний день,стало очень актуально!Всем мира и добра в Новом Году!!!
- Copy Link
- Report Inappropriate Content
Vidik wrote
Agreed. Now that Archer AX55 got support for DoH/DoT in the laterst firmware and as I understand AX53 runs on similar if not the same hardware, implementing DoH/DoT should be easy. AX53 is very popular router and DoH/DoT support should've been there from the start.
- Copy Link
- Report Inappropriate Content
@Kevin_Z I just bought this router today and I have an issue. The router automatically upgraded to this firmware so I don't know if the issue was this firmware or just the whole router itself.
My Download Speed over WiFi Can't seem to reach 400Mbps. Upload speed has no issue and showing my internet plan's speed. Tested with multiple devices, Iphone and Asus ROG 8, same result. on Ethernet I am getting the 500+ Mbps speed as I should be. I tried everything, all settings this router could offer but just couldn't find a fix. Only thing I haven't tried is downgrading firmware as the router isn't allowing me and kept giving me upload error. And Yes I made sure the version, us eu, etc. are correct.
Shown below are the comparison.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi there, VPN client with ProtonVPN (free plan) not working.
It nevers connects (Connecting). I can't see the logs or anything. Any way to debug? Also, assuming it works, is there any way to make it the default withou having to select individual devices from the device list?
thanks
- Copy Link
- Report Inappropriate Content
@Pelacables ok, finally made it work (PEBCAK) thanks a lot, seems like I can keep the router ;-)
(In any case, I could find a place to check the vpn connectio nlogs... is this on purpose?
2025-02-05 21:33:42 NAT INFO [1473] Initialization succeeded
2025-02-05 21:33:41 NAT INFO [1473] Initialization succeeded
2025-02-05 21:33:35 Remote Management INFO [654] Service stop
2025-02-05 21:33:33 NAT INFO [4018] Initialization succeeded
2025-02-05 21:33:33 NAT INFO [4018] Initialization succeeded
2025-02-05 21:33:26 NAT INFO [3091] Initialization succeeded
2025-02-05 21:33:25 NAT INFO [3091] Initialization succeeded
2025-02-05 21:33:22 Traffic Statistics INFO [3394] stats reset
2025-02-05 21:32:28 NAT INFO [3871] Initialization succeeded
2025-02-05 21:32:27 NAT INFO [3871] Initialization succeeded
2025-02-05 21:32:18 Remote Management INFO [3065] Service stop
2025-02-05 21:32:17 NAT INFO [2664] Initialization succeeded
2025-02-05 21:32:17 NAT INFO [2664] Initialization succeeded
2025-02-05 21:32:10 Remote Management INFO [1913] Service stop
2025-02-05 21:32:08 NAT INFO [1371] Initialization succeeded
2025-02-05 21:32:08 NAT INFO [1371] Initialization succeeded
2025-02-05 21:32:05 Traffic Statistics INFO [3394] stats reset
2025-02-05 21:31:35 NAT INFO [3064] Initialization succeeded
2025-02-05 21:31:34 NAT INFO [3064] Initialization succeeded
2025-02-05 21:31:26 Remote Management INFO [2310] Service stop
2025-02-05 21:31:24 NAT INFO [1829] Initialization succeeded
2025-02-05 21:31:23 NAT INFO [1829] Initialization succeeded
2025-02-05 21:31:21 Traffic Statistics INFO [3394] stats reset
2025-02-05 21:16:41 NAT INFO [1008] Initialization succeeded
2025-02-05 21:16:40 NAT INFO [1008] Initialization succeeded
2025-02-05 21:16:34 Remote Management INFO [341] Service stop
2025-02-05 21:16:32 NAT INFO [3609] Initialization succeeded
2025-02-05 21:16:31 NAT INFO [3609] Initialization succeeded
2025-02-05 21:16:29 Traffic Statistics INFO [3394] stats reset
2025-02-05 21:14:11 NAT INFO [1745] Initialization succeeded
2025-02-05 21:14:11 NAT INFO [1745] Initialization succeeded
2025-02-05 21:14:04 Remote Management INFO [926] Service stop
2025-02-05 21:14:02 NAT INFO [4048] Initialization succeeded
2025-02-05 21:14:01 NAT INFO [4048] Initialization succeeded
2025-02-05 21:13:58 Traffic Statistics INFO [3394] stats reset
2025-02-05 21:01:43 DHCPC INFO [907] receive ack from server with ip ...
- Copy Link
- Report Inappropriate Content
@Kevin_Z When will be this firmware update Stable Release?
- Copy Link
- Report Inappropriate Content
@Kevin_Z DoT and DoH for AX53 V1 Please
- Copy Link
- Report Inappropriate Content
Information
Helpful: 8
Views: 4991
Replies: 38
Voters 6
