3420 and 4G modem - two tricks which worked for me (may be it works for you)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

3420 and 4G modem - two tricks which worked for me (may be it works for you)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
3420 and 4G modem - two tricks which worked for me (may be it works for you)
3420 and 4G modem - two tricks which worked for me (may be it works for you)
2013-10-13 14:46:56
Region : India

Model : TL-MR3420

Hardware Version : V2

Firmware Version :

ISP :


MY SET UP : ROUTER TL-MR3420
MODEM : HUAWEI E392u-92 4G LTE USB modem dongle


[INDENT]
small note for clarity :

my modem is in router compatibility list..

FYI the modem bin for your modem may be you can find here: http://www.tp-link.com/en/support/3g/

modem compatibility list here: http://www.tp-link.com/en/support/3g-comp-list/?model=TL-MR3420

firmware download page here: http://www.tp-link.com/en/support/download/?pcid=202

[/INDENT]

Okay..

Earlier when i made this setup, i faced a lot of problems similar to what others are facing - router showing modem unplugged and may be router showing modem identified and then modem dropping frequently.. that was very frustrating.. I read and analyzed few things and below two tricks helped me a lot:

1. use external USB power hub:


some modems and may be especially 4G modems require more power than what the router USB can provide. using external power hub solved many of my difficulties, thanks to below link from where i got this hint:

http://www.ofmodemsandmen.com/powert.html

the hub i used is Belkin 4 port external USB power hub (however it is actually one port USB power hub that was needed for one Huawei modem dongle, but I could not find one good one readily available hence used this 4 port Belkin USB power hub (it is something similar to what is shown below)

http://www.ebay.in/itm/Belkin-USB-4-Port-Powered-Desktop-Hub-F4U040SA-1490-00-3-Years-Warranty-/111189163425?pt=IN_Computer_Components&hash=item19e363fda1&_uhb=1#ht_500wt_923

now no more modem dropping atall.. :)



2. provide modem dialing parameters manually


fine you would be attracted to select your 3G/4G provider from the list of your country, but if the router is not able to select your provider automatically properly (for me it was all the time wrongly selecting BPL mobile while my 3G account is actually of Vodafone), then you will be selecting it manually from the list and now if the router restarts for any reason (power failure, manual restart, whatever), then MAY BE it will again select a wrong provider by its logic and you will start failing to connect !!! solution : find your modem dialing parameters, it comes when you select your provider from the list, or if your provider is not in the list, then you can find it from your provider (the dialing parameters), and then provide it manually in advanced tab in modem and save it.. now you will be safe even if it restarts as it will take this from what is saved :cool: .. in my case i set below manually for Vodafone India and now no more connection issues even if router restarts as now it takes this from given saved parameters... :







above two tricks worked for me.. hope it helps you..
  0      
  0      
#1
Options
1 Reply
Re:3420 and 4G modem - two tricks which worked for me (may be it works for you)
2013-10-27 16:55:45
Simply replacing the factory 12v @ 1A, AC power supply with a 12v @ 2A may provide sufficient power for the modem.

This generally works well.

Cheers

The ModemsandMen Rooter team

http://whirlpool.net.au/wiki/router_openwrt
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 969

Replies: 1

Related Articles