Iot network
Iot network
Hi, I have just updated my router with the latest firmware, this adds iot network which I have setup.
I cannot see this network on my iPhone or enter it manually as a hidden network so I cannot therefore add any of my smart life iot devices as the smart home app needs to be on the network to setup these devices.
it seems a good idea to have them separate but is there a solution for this?
I've tried disabling the password and turning on and off and rebooting but it will never connect.
thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Update:
Hi, Thank you very much for your time and patience.
Please refer to this link to get the beta fix:
Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, is the "IOT Network" detectable by other mobile devices, like the computer/tablet?
Would there be any special characters in the IOT SSID, like space or "_"?
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
hi, no other laptop or phone can see it and yes there is an underscore as the default provided one had one but will definitely try without. Thsnks
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thanks for the feedback.
I'd like to follow up on your case via email to ask the senior engineer for further assistance.
By the way, could you please help me run a test:
if we enable the Guest network in 2.4GHz only and use the same SSID and password or "no security", will the Guest SSID be detected?
Wait for your reply and best regards.
- Copy Link
- Report Inappropriate Content
hi enabled guest network and that works as it shou
- Copy Link
- Report Inappropriate Content
Update:
Hi, Thank you very much for your time and patience.
Please refer to this link to get the beta fix:
Deco X50-5G_V1_1.2.1 with IoT and CPU Optimization
Best regards.
- Copy Link
- Report Inappropriate Content
I have the same problem of IoT network not visible from any device. I would like to try the beta firmware you suggested... Is it reliable enough? How long will we have to wait for a stable version?
- Copy Link
- Report Inappropriate Content
after speaking to support they advised me to reset the router to factory settings that then made this work for me without the beta software.
- Copy Link
- Report Inappropriate Content
To keep the devices connected, did you set the same SSID and password for the wifi network?
- Copy Link
- Report Inappropriate Content
yes I used the old WiFi name and address but .... sadly you can't move them over to the iot network so you have to delete and re-add each device.
some iot will let you change WiFi addresses but none of mine did!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 204
Replies: 11