Archer TXE70UH Linux Drivers?
Is there any way to get Archer TXE70UH working on Linux?
I am defaulting to my mainboard's built-in WiFi6 AX200 for now. It would be great if I could use my Archer TXE70UH in Linux.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Repository: https://github.com/lwfinger/rtw8852cu
Instructions: https://github.com/lwfinger/rtw8852cu/issues/17
- Copy Link
- Report Inappropriate Content
Thanks. I am stuck on this step.
sudo insmod /lib/modules/$(uname -r)/kernel/drivers/net/wireless/8852cu.ko
I get the following error.
insmod: ERROR: could not insert module /lib/modules/6.8.0-41-generic/kernel/drivers/net/wireless/8852cu.ko: Key was rejected by service
- Copy Link
- Report Inappropriate Content
ChatGPT says...
The error message indicates that the kernel module you are trying to load (8852cu.ko
) is being rejected due to an issue with its cryptographic signature. This often happens on systems with Secure Boot enabled. Here’s how you can troubleshoot and fix the issue:
1. Check Secure Boot Status
Secure Boot can block unsigned or improperly signed modules.
- Run the following command to check Secure Boot status: mokutil --sb-state
- Copy Link
- Report Inappropriate Content
@vNetwork Full solution that worked for me posted here. https://github.com/lwfinger/rtw8852cu/issues/17#issuecomment-2517221458
- Copy Link
- Report Inappropriate Content
I am happy with my WiFi internet speed on my Linux Mint OS. My internet plan is 1000 Mbps download and 50 Mbps upload.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I woke up today and the TP-Link TXE70UH stopped working.
Running lsusb in the terminal shows this.
Bus 001 Device 003: ID 0bda:1a2b Realtek Semiconductor Corp. RTL8188GU 802.11n WLAN Adapter (Driver CDROM Mode)
Now it is saying it is RTL8188GU.
- Copy Link
- Report Inappropriate Content
https://github.com/lwfinger/rtw8852cu/issues/17#issue-2359056376
sudo vi /lib/udev/rules.d/40-usb_modeswitch.rules
......
# Realtek 8852CU Wifi USB
ATTR{idVendor}=="35bc", ATTR{idProduct}=="0102", RUN+="/usr/sbin/usb_modeswitch -K -v 35bc -p 0102"
......
Reboot your Linux.
Enter lsusb in the terminal.
You should see.
Bus 001 Device 003: ID 35bc:0102 Realtek 802.11ax WLAN Adapter
- Copy Link
- Report Inappropriate Content
I managed to resolve my Linux driver and USB WiFi adapter mode switching issues with the help of this wonderful person here.
https://github.com/morrownr/rtl8852cu-20240510/issues/15
- Copy Link
- Report Inappropriate Content
Very happy with my internet speed on Linux Mint. I can only get half of this download speed on Windows 11 Pro on the same PC!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 432
Replies: 10
Voters 0
No one has voted for it yet.