Home Network Community > All Threads > Archer VR2100v virtual server - no interface to add
< All Threads

Archer VR2100v virtual server - no interface to add

Archer VR2100v virtual server - no interface to add

Archer VR2100v virtual server - no interface to add
Archer VR2100v virtual server - no interface to add
Monday - last edited 10 hours ago
Tags: #Port Forwarding
Model: Archer VR2100v  
Hardware Version: V1
Firmware Version: 1.18.0 0.9.1 v009e.0 Build 241018 Rel.43535n

Hi

 

I'm facing issues when adding new rules to port-forwarding/virtual server. The drop-down field "Interface Name" only gives me the option "No interface":

 

no interface

 

I can fill the other fields but the "Save" button stays always blocked - I assume because of the "No interface".

 

Any hints on how to fix this?

I've already tried restart, different browser, and firmware upgrade (currently on the latest version).

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Archer VR2100v virtual server - no interface to add-Solution
Yesterday - last edited 10 hours ago

  @terziyski, I did have interfaces there and I had a fully working internet connection.

 

Anyway, I found another issue later: I couldn't connect to my employer's VPN. The fault was the DS-Lite connection from Vodafone. I then requested Dual-Stack (ipv4 and ipv6) from Vodafone and that fixed the connection issue with the VPN; I can also forward ports now - the problem is resolved.

 

I assume that means port forwarding doesn't work when the router is configured for a DS-Lite connection, as described in this article: https://www.tp-link.com/de/support/faq/2750/.

Would be nice if that article could be updated with a warning stating that port-forwarding will no longer work. Having it in the manual too wouldn't hurt.

Recommended Solution
  1  
  1  
#3
Options
2 Reply
Re:Archer VR2100v virtual server - no interface to add
Yesterday

  @Dr1T 

 

If you don't have any Internet connection configured here:

 

 

you'll have onlly "No interface" option in this drop-down menu.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Archer VR2100v virtual server - no interface to add-Solution
Yesterday - last edited 10 hours ago

  @terziyski, I did have interfaces there and I had a fully working internet connection.

 

Anyway, I found another issue later: I couldn't connect to my employer's VPN. The fault was the DS-Lite connection from Vodafone. I then requested Dual-Stack (ipv4 and ipv6) from Vodafone and that fixed the connection issue with the VPN; I can also forward ports now - the problem is resolved.

 

I assume that means port forwarding doesn't work when the router is configured for a DS-Lite connection, as described in this article: https://www.tp-link.com/de/support/faq/2750/.

Would be nice if that article could be updated with a warning stating that port-forwarding will no longer work. Having it in the manual too wouldn't hurt.

Recommended Solution
  1  
  1  
#3
Options

Information

Helpful: 0

Views: 36

Replies: 2

Tags

Port Forwarding
Related Articles
Virtual Server cannot be saved on Archer VR2100v
2826 0
VR2100v(DE) interface freezing when trying to access advanced settings
1629 4
Archer VR2100v - What's up with the versioning
2899 0
Archer VR2100v and RE330 address reservation
618 0
Archer VR2100v Paketverlust
297 0
Mesh Netzwerk mit Archer VR2100v und Archer C80
491 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.