Broadband over EE mobile

Broadband over EE mobile

Broadband over EE mobile
Broadband over EE mobile
2024-10-12 20:14:46 - last edited Thursday
Model: Deco X50-4G  
Hardware Version: V2
Firmware Version:

We have very poor mobile signals here, but apparently do have EE - and we have put in a mobile signal booster which seems to be working.  The guy who installed it said that it would not be good enough to get good broadband, but that he had detected a signal that we might be able to use.  I have therefore bought a Decon X50-4G and a MiMo aerial which I plan to install soon.  

What sort of SIM should I put into the Deco - I have a spare EE pay as you go SIM (I think it is PAYG) - should that do the job?  Or is there a better way?

Also, I already have a router on my network, fed from the landline.  Presumably I will need to set the X50 to have some other IP address (the router is 192.168.1.1) and change any devices that I want to feed off the X50 to whatever I set the X50 to - does that make sense?

Any advice would be very much appreciated.

Thanks

Steve

  0      
  0      
#1
Options
1 Accepted Solution
Re:Broadband over EE mobile-Solution
2024-10-14 05:38:38 - last edited Thursday

  @Beachcomber 

Hi,

Thanks for posting on TP-Link Community.

 

Deco X50-5G supports Nano-SIM. And please make sure it supports the specification.

 

After you set up the Deco network, you can change the LAN IP address.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Broadband over EE mobile-Solution
2024-10-14 05:38:38 - last edited Thursday

  @Beachcomber 

Hi,

Thanks for posting on TP-Link Community.

 

Deco X50-5G supports Nano-SIM. And please make sure it supports the specification.

 

After you set up the Deco network, you can change the LAN IP address.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 79

Replies: 1

Related Articles