17
Votes

Urgent Request: OpenVPN Client for Archer AX53 (AX3000) V1

 
17
Votes

Urgent Request: OpenVPN Client for Archer AX53 (AX3000) V1

Urgent Request: OpenVPN Client for Archer AX53 (AX3000) V1
Urgent Request: OpenVPN Client for Archer AX53 (AX3000) V1
2024-10-07 21:45:56 - last edited Tuesday
Model: Archer AX53  
Hardware Version: V1
Firmware Version: Archer AX53 V1 1.2.4 Build 20240509
Hello, I just purchased recently Archer AX53 AX3000 V1. I also updated with the latest official firmware available V1_1.2.4 Build 20240509.
 

Could you please release new firmware update that support OpenVPN Client function.

This would make TP-Links Routers a much Better service since the popularity of VPN's is increasing Each day and more people want to connect their router's to a VPN cause it's easier and more reliable and secure.

And I hope TP-Link would release a New Firmware for VPN Client feature.

Please pass it along to the development team and put this at a Top Priority if Possible.
 

Thank you for your consideration.

 

 

**Note: 

Archer AX53_V1 1.2.4 Build 20240206 (Public Beta Firmware for Trial)

From this link: https://community.tp-link.com/en/home/forum/topic/593722?sortDir=DESC&page=1

I have tried that public beta firmware, it has the OpenVPN Client feature however that function doesn't work even tho the status already "connected" to the VPN but when I check my IP Location still not change. btw I'm using ProtonVPN.

I hope TP-Link will release official firmware that support VPN Client feature because the "Public Beta" released already more than half a year ago.

   
   
#1
Options
1 Accepted Solution
Re:Urgent Request: OpenVPN Client for Archer AX53 (AX3000) V1-Solution
Tuesday - last edited Tuesday

Hello @Router_Review  @loglogyoo  @mr_marcus  @Jeffsa12  @Refi  @wside  @Vidik 

 

I'm happy to inform you that the official firmware of Archer AX53 V1 will be rolled out gradually in various regions soon and we would like to provide a pre-release version for you to enjoy new features like EasyMesh Ethernet Backhaul, IoT Network, WireGuard VPN, etc.

 

Give it a go and let me know how it works in your network:

Archer AX53 V1 Supports EasyMesh Ethernet Backhaul, WireGuard VPN, IoT Network, and More

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
#19
Options
17 Reply
Re:Urgent Request: OpenVPN Client for Archer AX53 (AX3000) V1
2024-10-09 20:15:46

  @Router_Review 

**Note: 

Archer AX53_V1 1.2.4 Build 20240206 (Public Beta Firmware for Trial)

From this link: https://community.tp-link.com/en/home/forum/topic/593722?sortDir=DESC&page=1

I have tried that public beta firmware, it has the OpenVPN Client feature however that function doesn't work even tho the status already "connected" to the VPN but when I check my IP Location still not change. btw I'm using ProtonVPN.

I hope TP-Link will release official firmware that support VPN Client feature because the "Public Beta" released already more than half a year ago.

#2
Options
Re:Urgent Request: OpenVPN Client for Archer AX53 (AX3000) V1
2024-10-10 07:47:56

  @Router_Review 

 

Hello, thank you for posting on the TP-Link community, and we certainly appreciate all your feedback and feature request(s) here.

While we don't have any specific details that I can share around if this feature can come to your home router, or when it might, I'll make sure to log this feature request and pass it along to the team.

 

 

#3
Options
Re:Urgent Request: OpenVPN Client for Archer AX53 (AX3000) V1
2024-10-10 09:46:30

  @Marvin_S Hi, Thank you for your reply.

Could you please pass it along to the development team about OpenVPN Client Feature and ECO MODE Feature for AX53 AX3000 V1.

Put this at a Top Priority if Possible.

 

Thank you for your consideration.

#4
Options
Re:Urgent Request: OpenVPN Client for Archer AX53 (AX3000) V1
2024-10-14 03:49:52 - last edited 2024-10-14 06:23:33

  @Marvin_S Hi I contacted global technical support on  https://www.tp-link.com/en/support/contact-technical-support/#E-mail-Support

And the good news they approved my request and they said they will release the official firmware that support OpenVPN Client feature and to be expected at the end of this year.

#5
Options
Re:Urgent Request: OpenVPN Client for Archer AX53 (AX3000) V1
2024-10-14 06:36:56 - last edited 2024-10-14 06:39:35

special thanks to @Kevin_Z and @Marvin_S Thank you so much for your assistance/help. I look forward for the new firmware that support "VPN Client" feature for AX53 AX3000 V1.

#6
Options
Re:Urgent Request: OpenVPN Client for Archer AX53 (AX3000) V1
2024-10-18 12:13:26

Router_Review wrote

Hello, I just purchased recently Archer AX53 AX3000 V1. I also updated with the latest official firmware available V1_1.2.4 Build 20240509.
 

Could you please release new firmware update that support OpenVPN Client function.

This would make TP-Links Routers a much Better service since the popularity of VPN's is increasing Each day and more people want to connect their router's to a VPN cause it's easier and more reliable and secure.

And I hope TP-Link would release a New Firmware for VPN Client feature.

Please pass it along to the development team and put this at a Top Priority if Possible.
 

Thank you for your consideration.

 

 

**Note: 

Archer AX53_V1 1.2.4 Build 20240206 (Public Beta Firmware for Trial)

From this link: https://community.tp-link.com/en/home/forum/topic/593722?sortDir=DESC&page=1

I have tried that public beta firmware, it has the OpenVPN Client feature however that function doesn't work even tho the status already "connected" to the VPN but when I check my IP Location still not change. btw I'm using ProtonVPN.

I hope TP-Link will release official firmware that support VPN Client feature because the "Public Beta" released already more than half a year ago.

  @Router_Review Hey brotha, I own AX53 AX3000 V1 as well..and I really need VPN Client Feature.. that would be useful nowadays.. come on TP-Link please add VPN Client Feature for AX53 V1...

#7
Options
RE:Urgent Request: OpenVPN Client for Archer AX53 (AX3000) V1
2024-10-19 09:29:55 - last edited 2024-10-19 09:38:11

this feature is very important for many AX53 V1 user.. please add this feature on the next firmware update!

#8
Options
RE:Urgent Request: OpenVPN Client for Archer AX53 (AX3000) V1
2024-10-21 16:51:43 - last edited 2024-10-21 17:02:29

This is a must, and if possible, a DoH/DoT option would be great to make DNS more secure for our home networks.

#9
Options
RE:Urgent Request: OpenVPN Client for Archer AX53 (AX3000) V1
2024-10-21 23:34:55
Its easy update, do it.
#10
Options
RE:Urgent Request: OpenVPN Client for Archer AX53 (AX3000) V1
2024-10-22 04:57:27

  @Refi I think tplink must release major firmware update for every Archer AX series wifi router. come on tplink Enginnering team lol

#11
Options

Information

Helpful: 17

Views: 1456

Replies: 17

Voters 17

voter's avatar
voter's avatar
voter's avatar
voter's avatar
+ 13 Voters