WAN/LAN Ports
WAN/LAN Ports
Tags:
#Multi-Gigabit
#Wi-Fi 6E
Hello
I have my BELL Gigahub at 2GBS Connected to my TPLINK AXE300 router in access point mode.
i have a cat8 cable from the axe300 running upstairs to another router (access point) and I can't seem to use the 2.5gbps port on the axe300 as a LAN port. Whenever I connect the LAN cable to the 2.5gbps port to the other router, the internet will no longer work on my axe300 (I believe it defaults the 2.5 port as the wan port)
is there a way to set the 2.5 port to a lan only port so it will give me the full multi gig speeds upstairs?
thanks
Re:WAN/LAN Ports
It's here where you select the port to behave as WAN or LAN:
If 2.5 gbps port is not selected as an internet port it should behave as LAN port.
If this was helpful click once on the arrow pointing upward.
If this solves your issue, click once the star to mark it as a "Recommended Solution".