Port forwading through AX1500
I have configured port forwarding through the 192.168.0.1 admin web site. This shows no error.
The port is a simple http service that I can verify via its LAN address.
However I cannot access the service via the IP address shown on the admin site's Advanced/Network page.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
If you are trying to access your http service via the Internet, then verify that the Internet IP address you see on the Advanced/Network page is a public IP address. Only public IP addresses can be reached via the Internet.
The ranges below are not public IP addresses.
10.0.0.0 – 10.255.255.255
172.16.0.0 – 172.31.255.255
192.168.0.0 – 192.168.255.255
100.64.0.0 – 100.127.255.255
- Copy Link
- Report Inappropriate Content
Hi,
If you are trying to access your http service via the Internet, then verify that the Internet IP address you see on the Advanced/Network page is a public IP address. Only public IP addresses can be reached via the Internet.
The ranges below are not public IP addresses.
10.0.0.0 – 10.255.255.255
172.16.0.0 – 172.31.255.255
192.168.0.0 – 192.168.255.255
100.64.0.0 – 100.127.255.255
- Copy Link
- Report Inappropriate Content
Hi, thanks for posting question here.
If you want to take port forwarding, please follow this guide.
If failed to configure, you may refer to this troubleshooting guide.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 167
Replies: 2
Voters 0
No one has voted for it yet.