Can't Access Remote Management

Can't Access Remote Management

Can't Access Remote Management
Can't Access Remote Management
2024-09-10 11:47:02
Model: Archer AX72 Pro  
Hardware Version: V1
Firmware Version: 1.3.1 Build 20240426 rel.40133(5553)

I am using Starlink as ISP. its router is connected to TP Link AX72 Pro in bypass mode.

 

I can't access Remote management. I already done the instruction as instructed in the manual book.

 

is there anything else I need to do?

  0      
  0      
#1
Options
3 Reply
Re:Can't Access Remote Management
2024-09-10 14:09:12 - last edited 2024-09-10 14:22:39

  @yiz 

 

Compare your AX72 Pro Internet (WAN port) IP address with the IP addres from https://ping.eu - they should be the same.

If they are not the same then you're behind CG-NAT and this won't work.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Can't Access Remote Management
2024-09-10 15:33:10
I checked. It is not the same. does this means I cant do remote management in any ways?
  0  
  0  
#3
Options
Re:Can't Access Remote Management
2024-09-10 17:55:02 - last edited 2024-09-10 17:56:32

  @yiz 

 

You can't directly, but here's a thread discussing a possible workarounds.

The other way to do this is to use the Tether app for remote management.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 362

Replies: 3

Related Articles