Home Network Community > All Threads > RE200 V5 with Archer VX1800v OneMesh? EasyMesh?
< All Threads

RE200 V5 with Archer VX1800v OneMesh? EasyMesh?

RE200 V5 with Archer VX1800v OneMesh? EasyMesh?

RE200 V5 with Archer VX1800v OneMesh? EasyMesh?
RE200 V5 with Archer VX1800v OneMesh? EasyMesh?
2024-09-08 14:22:23 - last edited 2024-09-10 17:57:08
Tags: #OneMesh #EasyMesh
Model: RE200   Archer VX1800v  
Hardware Version: V5
Firmware Version: 1.0.23

So my problem starts with web page.

https://www.tp-link.com/en/home-networking/range-extender/re200/v5/#specifications
This link clearly shows my just-bought RE200 V5 supports EasyMesh which is compatible with my VX1800v device. 

However I just found out that the device is not compatible with EasyMesh, it is for OneMesh. Now I am getting an error that I cannot use two devices together as a mesh system.

Any possible solution? Any firmware update planned to any device? Any work around?

Thanks.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?-Solution
2024-09-10 16:58:56 - last edited 2024-09-10 17:57:08

  @trioxify 

 

Please use the RE200's internal web management interface to setup the EasyMesh connection. The Tether app may not have been updated yet to reflect the features of firmware 1.0.23.

 

There are different ways to get into the web interface via a web browser.

You can try if http://tplinkrepeater.net/ works for you. If it doesn't, then you need to access it via its current IP address, like http://192.168.x.x, but you have to replace the x with the correct numbers.

Recommended Solution
  0  
  0  
#5
Options
5 Reply
Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?
2024-09-08 22:32:46

  @trioxify 

 

Hi,

 

According to the firmware update notes EasyMesh was added to the RE200 V5 in firmware version 1.0.23.

https://www.tp-link.com/en/support/download/re200/v5/#Firmware

 

Can you please post a screenshot that shows the error you are getting?

  0  
  0  
#2
Options
Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?
2024-09-10 15:55:18
Extender settings screen Extender sertings screen

 

 

 

 

Extender RE200 V5 Extender Model

 

Main Router settings screen

 

 

 

Error says main router does not support OneMesh. 

The thing is extender should support the EasyMesh but it is not visible on the settings screen.

 

 

 

 

 

@woozle 

 

 

  0  
  0  
#3
Options
Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?
2024-09-10 15:55:44

Error message  @trioxify 

  0  
  0  
#4
Options
Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?-Solution
2024-09-10 16:58:56 - last edited 2024-09-10 17:57:08

  @trioxify 

 

Please use the RE200's internal web management interface to setup the EasyMesh connection. The Tether app may not have been updated yet to reflect the features of firmware 1.0.23.

 

There are different ways to get into the web interface via a web browser.

You can try if http://tplinkrepeater.net/ works for you. If it doesn't, then you need to access it via its current IP address, like http://192.168.x.x, but you have to replace the x with the correct numbers.

Recommended Solution
  0  
  0  
#5
Options
Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?
2024-09-10 18:11:05

  @woozle 

 

 

So as you mentioned I have successfully enabled easymesh on both devices. Now I have a network topology like shown above.

 

 

 

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 322

Replies: 5

Tags

OneMesh EasyMesh
Related Articles
Archer VX1800v EasyMesh ethernet backhaul
443 0
Setting up an Easy Mesh with RE705X and Archer VX1800v
1410 2
Can Re305v4 supporting Easy mesh work with router supporting one mesh?
154 0
OneMesh (EasyMesh?) Not Configuring Properly
2956 1
OneMesh between Archer C6 and RE200
1653 0
NX200 and RE200 OneMesh/EasyMesh
34 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.