Home Network Community > All Threads > Connecting VOIP to router or modem in bridge mode?
< All Threads

Connecting VOIP to router or modem in bridge mode?

Connecting VOIP to router or modem in bridge mode?

Connecting VOIP to router or modem in bridge mode?
Connecting VOIP to router or modem in bridge mode?
2024-07-04 02:29:25 - last edited 2024-07-05 02:42:16
Tags: #Installation
Model: Archer AX55 Pro  
Hardware Version: V1
Firmware Version:

Hi there, 

 

Is there a way to connect a RJ11 connected VOIP phone to a 2nd router (i.e. VR2100v) configured in bridge/AP mode?

 

For Example in order of preference:

 

1) Main router (Archer AX55 Pro) wired to the 2nd modem/router (VR2100v with RJ11 input) connected directly to the DECT phone.

 

2) Main router (Archer AX55 Pro) wired to the 2nd modem/router (VR400 without RJ11 input) connected indirectly to the DECT phone via an ATA.

 

3) Main router (Archer AX55 Pro) indirectly connected to DECT phone via an ATA and wired to the 2nd router (VR400).

 

Does the AX55 even have telephony capabilities for this task?

 

Thank you in advance.

  0      
 
  0      
 
#1
Options
4 Reply
Re:Connecting VOIP to router or modem in bridge mode?
2024-07-05 02:56:21

  @Francis_Blac 

 

Hi, thanks for posting question here.

I am afraid that Archer AX55 Pro is a common wireless router, it have no any function related to VoIP.

You may use Archer VR2100v directly and set up VoIP feature following this guide.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  0  
  0  
#2
Options
Re:Connecting VOIP to router or modem in bridge mode?
2024-07-05 03:55:17 - last edited 2024-07-05 03:56:24

Thanks for your response.

 

So just to be clear, the VR2100v will not be able to deliver it's telephony capabilities if it is in AP mode?

 

I.e. Does the VR2100v have to be the root router in order to deliver VOIP or can it be the 2nd router and still work for VOIP

  0  
  0  
#3
Options
Re:Connecting VOIP to router or modem in bridge mode?
2024-07-05 11:05:43

  @Francis_Blac 

 

VR2100v according its specs has two operating modes: DSL modem router and Wireless router.

To configure VoIP services VR2100v should be used in DSL modem router mode and it has to be the main router.

If the router doesn't have VoIP capabilities then you should use an ATA device to be able to use the VoIP services provided by the ISP.

When using an ATA device it shouldn't matter whether it's connected to the main router or a second device in AP mode.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#4
Options
Re:Connecting VOIP to router or modem in bridge mode?
2024-07-05 11:17:33

  @terziyski 

 

Brilliant, thank you very much for this answer. 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 347

Replies: 4

Tags

Installation
Related Articles
VOIP on a WLAN Router in Bridge Mode
753 0
Bridge mode Modem Router
1230 0
VoIP not working in bridge mode
897 0
TP-Link router connecting to Sagencom modem/router
237 0
Can I use the VR1200 as pure modem in bridge mode?
1148 0
Archer VR2600 in bridge (modem only) mode
6291 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.