Main Wifi is disabled - I'm unable to enable it (Lan + Guest Wifi works)

Main Wifi is disabled - I'm unable to enable it (Lan + Guest Wifi works)

Main Wifi is disabled - I'm unable to enable it (Lan + Guest Wifi works)
Main Wifi is disabled - I'm unable to enable it (Lan + Guest Wifi works)
2024-06-15 19:45:35 - last edited 2024-07-01 03:34:16
Model: Deco M4  
Hardware Version: V2
Firmware Version: 1.6.2 Build 20240308 Rel. 55841

Hello.

 

I have set four DECOs as Mesh. It worked great for years.
Today I suddenly lost the wifi on all devices. I can't find the wifi.
I rebooted all DECOs - no solution.
In my iOS App I can't find any error. 
LAN works, but all wireless devices are not connected any more to the main wifi.

Via the Browser on LAN connected Computer
-> http://tplinkdeco.net -> Advanced -> Status
i can see that:
 

Wireless

SSID:

AirportXXX

2.4GHz Wireless:

Enable: Off

Channel: 10

5GHz Wireless:

Enable: Off

Channel: 36


the wireless connection is disabled.
Which sounds understandable, because I can not find it.

But How can I enable it again?

On my iOS App it looks like its enabled, but when I try to make changes to SSID or Password the error pops up "not pssible at the moment. try later".

Would be great if somebody can help me out.

(I was able to set up a guest network and could connect with my phone to it)

Thank you

 

  1      
  1      
#1
Options
1 Accepted Solution
Re:Main Wifi is disabled - I'm unable to enable it (Lan + Guest Wifi works)-Solution
2024-06-17 06:16:11 - last edited 2024-07-01 03:34:16

  @Thermo 

Hi,

 

Have you enabled ECO mode? Please check if you have set WIFI schedule.

 

If not, you can reset one of the satellite Deco unit, and then configure it again. If it works, you can reset the rest units and add them to the new network.

If you cannot see the default Deco WIFI after you reset, or the same issue comes again after you set up, please contact the local support with the issue and the results above.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Main Wifi is disabled - I'm unable to enable it (Lan + Guest Wifi works)-Solution
2024-06-17 06:16:11 - last edited 2024-07-01 03:34:16

  @Thermo 

Hi,

 

Have you enabled ECO mode? Please check if you have set WIFI schedule.

 

If not, you can reset one of the satellite Deco unit, and then configure it again. If it works, you can reset the rest units and add them to the new network.

If you cannot see the default Deco WIFI after you reset, or the same issue comes again after you set up, please contact the local support with the issue and the results above.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Main Wifi is disabled - I'm unable to enable it (Lan + Guest Wifi works)
2024-06-17 08:20:06

  @Thermo 

 

Have a very similar problem with mine here. 

Curious if you find a solution beyond resetting the entire system 

  0  
  0  
#3
Options
Re:Main Wifi is disabled - I'm unable to enable it (Lan + Guest Wifi works)
2024-06-17 08:26:19

  @Sunshine 
Thanks for the reply.
No I did not.


Yes I will going to reset one of the Deco units or maybe the whole network. Thanks

  1  
  1  
#4
Options

Information

Helpful: 1

Views: 359

Replies: 3

Related Articles