Home Network Community > All Threads > DHCP issues in Archer C86 after firmware upgrade
< All Threads

DHCP issues in Archer C86 after firmware upgrade

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

DHCP issues in Archer C86 after firmware upgrade

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DHCP issues in Archer C86 after firmware upgrade
DHCP issues in Archer C86 after firmware upgrade
2024-05-09 11:47:09 - last edited 2024-05-18 12:39:51
Tags: #Firmware Update #WDS/Range Extender Mode
Model: Archer A5  
Hardware Version: V1
Firmware Version: Archer C86(US)_V1_1.13.2 Build 230824

 

I'm having problems with my Archer C86 after firmware update Archer C86(US)_V1_1.13.2 Build 230824

The device is used to wirelessly extend a Lan network, with which the Wan is not connected and is used in Wds mode.

From time to time the device deconfigures its fixed Lan IP and takes one provided by the Dhcp of the main router. On the other hand, the Dhcp server part of the C86 provides IP/gateway/DNS to clients even if said server is uninhabited (and defaults its DNS to its IP and secondary 0.0.0.0, servers that do not resolve names) thus clients have Ping but cannot resolve names.

Any ideas?

With the previous firmware this configuration was OK.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:DHCP issues in Archer C86 after firmware upgrade-Solution
2024-05-10 03:44:15 - last edited 2024-05-18 12:39:51

  @LisandroP 

 

Hi, it is suggested to factory reset C86 and reconfigure it.

For your reference: How do I use the WDS Bridging function to extend my wireless network?

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:DHCP issues in Archer C86 after firmware upgrade-Solution
2024-05-10 03:44:15 - last edited 2024-05-18 12:39:51

  @LisandroP 

 

Hi, it is suggested to factory reset C86 and reconfigure it.

For your reference: How do I use the WDS Bridging function to extend my wireless network?

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
Recommended Solution
  0  
  0  
#2
Options
Re:DHCP issues in Archer C86 after firmware upgrade
2024-05-18 12:41:43
This solution works fine Thanks a lot!!!
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 375

Replies: 2

Tags

Firmware Update WDS/Range Extender Mode
Related Articles
Issues after firmware upgrade
936 0
I need Archer C86 WDS support
931 0
Firmware upgrade 2 issues
485 0
Firmware Upgrade Issues - TL-WR841N
407 0
Issues after firmware upgrade
2180 0
Archer C24 firmware upgrade problem
1142 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.