Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > About access point mode

< All Threads

About access point mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

About access point mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Augratin

2024-04-22 23:15:03 - last edited 2024-04-23 07:17:51

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-04-22

About access point mode

2024-04-22 23:15:03 - last edited 2024-04-23 07:17:51

Model: Archer AX55

Hardware Version: V1

Firmware Version: 1.2.6 build 20231130

Hi. I want to know that I just connect ax55 (to use it as AP) to original wireless router that I use by connect lan(zyxel) to wan(tplink ax55) and set new ssid without set it into AP mode and it's work( I think it auto turn itself to AP). So, Is it correct to just connect it without setting AP? Or I should do as user guide said. Is it will lose some function?

thank you.

1 Accepted Solution

terziyski

LV7

2024-04-23 01:43:48 - last edited 2024-04-23 07:17:51

Posts: 7142

Helpful: 5359

Solutions: 1220

Stories: 7

Registered: 2013-10-12

Re:About access point mode-Solution

2024-04-23 01:43:48 - last edited 2024-04-23 07:17:51

@Augratin

Here's the difference between router mode and AP mode.

If you leave AX55 in router mode in this configuration, it will work but will introduce a double NAT in your network.

If that's not a concern for you, leave it that way. If it is, just switch to AP mode.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

Recommended Solution

2 Reply

terziyski

LV7

2024-04-23 01:43:48 - last edited 2024-04-23 07:17:51

Posts: 7142

Helpful: 5359

Solutions: 1220

Stories: 7

Registered: 2013-10-12

Re:About access point mode-Solution

2024-04-23 01:43:48 - last edited 2024-04-23 07:17:51

@Augratin

Here's the difference between router mode and AP mode.

If you leave AX55 in router mode in this configuration, it will work but will introduce a double NAT in your network.

If that's not a concern for you, leave it that way. If it is, just switch to AP mode.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

Information

Helpful: 0

Replies: 2

About access point mode

About access point mode

Information

Voters 0

Tags