Home Network Community > All Threads > TP-Link AV600 - cannot configure extender
< All Threads

TP-Link AV600 - cannot configure extender

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link AV600 - cannot configure extender

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link AV600 - cannot configure extender
TP-Link AV600 - cannot configure extender
2024-04-22 20:56:01
Model: TL-WPA4220 KIT  
Hardware Version:
Firmware Version:

Hi, I hope someone can help with the following:

We have been using the TL-WPA4220 KIT / AV600 for a few years without a problem. The extender stopped working for some reason. I switched it off and paired it again succesfully but it came up with "TP-Link_93A0" instead of our normal network name. I had forgotten the password for the extender so I did a factory reset so I could use the password that is on the label on the device.

I can now connect to the internet via the extender. I tried to log into the extender so I could change the network name and password so it would be synced with our normal wifi network. I cannot get in though. When I use http://tplinkplclogin.net it comes up with a page saying I need to connect via wifi to the extender directly but I am and it still comes up with the same page. 

I have tried it with an ethernet cable but I get the same result.

Any ideas?

regards

  0      
 
  0      
 
#1
Options
3 Reply
Re:TP-Link AV600 - cannot configure extender
2024-04-23 07:26:13

  @T140 

 

What is the hardware version of your TL-WPA4220? 

Please follow this guide to customize the wireless settings via tpPLC utility: How to customize wireless settings on tpPLC Utility

 

If your main router has WPS button, you could also clone the wireless settings via WPS: How can I copy the wireless setting from the front router using Wi-Fi Clone button? 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:TP-Link AV600 - cannot configure extender
2024-04-23 16:23:37

  @Sunshine 
thank you for your reply.

The model is: TL-WPA4229(UK) Ver: 3.0

  0  
  0  
#3
Options
Re:TP-Link AV600 - cannot configure extender
2024-04-24 01:53:03

  @T140 

 

You could stll try the methods in my last reply.

And for TL-WPA4220 V3, the login address of its web interface should be http://tplinkplc.net

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 422

Replies: 3

Related Articles
AV600 extender stopped working
290 0
Cannot configure IPv6
4061 0
cannot enter 192.168.1.1 (tp-link configuration)
2248 0
AV600 Wireless Extender
464 0
Cannot get into the TP-LINK router configuration page
887 0
cannot do set up of TP link extender
365 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.