Router to switch to router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Router to switch to router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Router to switch to router
Router to switch to router
2024-03-24 02:49:03 - last edited 2024-04-08 09:12:03

I just bought a new router and a switch.I already have internet cable(blue) through the ceiling ,i work fine with my laptop but since i need acces to another router so i plug that cable(blue) to my switch and connect a new cable to my laptop but it doesnt have internet,(it connect but have no internet) 

 

I test other cable from the main router .they work fine ,but for some reason my (blue) ceiling cable doesnt work with my new switch or router.(It work my PC or Laptop like normal)

 

I cant really replace my blue cable because already run through the wall and the ceiling.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Router to switch to router-Solution
2024-03-25 09:41:35 - last edited 2024-04-08 09:12:03

  @RANDOMguy 

 

Hi, is the ceiling cable connected to your main router on the other end?

Please confirm if the new switch and router are both TP-Link products, what are the model no. and hardware version?

For new TP-Link internet issue, you may try the following troubleshooting

Case 1: Orange/Red Internet light on the router:

    1. Unplug your router from the modem, connect your PC directly into the modem to verify the Internet status of your ISP.

    2. Reboot the ISP Modem and the Router, you must firstly power on the Router, once the router's fully powered on, power on the modem.

    3. Login to the web UI via http://tplinkwifi.net and set it up following the Quick Setup.

    4. If your PC has Internet when connected to the modem, but the Router still doesn't, please go to Advanced > Network > Internet > Mac Clone to clone the mac address of your PC. This FAQ contains detailed instructions of Mac Clone: https://www.tp-link.com/support/faq/2264/

 

Case 2: Green Internet light on the router:

    1. Login to the web management interface of the router (http://tplinkwifi.net), go to Advanced > Network > Internet > Advanced Settings > Change the DNS Servers into 1.1.1.1 and 8.8.8.8.

    2. Reboot the ISP Modem and the Router, you must firstly power on the Router, once the router's fully powered on, power on the modem.

 

You may check more detailed instructions following the FAQ: https://www.tp-link.com/support/faq/1556/

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Router to switch to router-Solution
2024-03-25 09:41:35 - last edited 2024-04-08 09:12:03

  @RANDOMguy 

 

Hi, is the ceiling cable connected to your main router on the other end?

Please confirm if the new switch and router are both TP-Link products, what are the model no. and hardware version?

For new TP-Link internet issue, you may try the following troubleshooting

Case 1: Orange/Red Internet light on the router:

    1. Unplug your router from the modem, connect your PC directly into the modem to verify the Internet status of your ISP.

    2. Reboot the ISP Modem and the Router, you must firstly power on the Router, once the router's fully powered on, power on the modem.

    3. Login to the web UI via http://tplinkwifi.net and set it up following the Quick Setup.

    4. If your PC has Internet when connected to the modem, but the Router still doesn't, please go to Advanced > Network > Internet > Mac Clone to clone the mac address of your PC. This FAQ contains detailed instructions of Mac Clone: https://www.tp-link.com/support/faq/2264/

 

Case 2: Green Internet light on the router:

    1. Login to the web management interface of the router (http://tplinkwifi.net), go to Advanced > Network > Internet > Advanced Settings > Change the DNS Servers into 1.1.1.1 and 8.8.8.8.

    2. Reboot the ISP Modem and the Router, you must firstly power on the Router, once the router's fully powered on, power on the modem.

 

You may check more detailed instructions following the FAQ: https://www.tp-link.com/support/faq/1556/

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 462

Replies: 1

Related Articles