Help required - Deco M5 AC1300 / recently updated to from EE 5GEE Router to full fibre.
Help required - Deco M5 AC1300 / recently updated to from EE 5GEE Router to full fibre.
Hi Guys,
I've recently updated my internet from a very expensive 5G EE Gigacube to BRSK Full Fibre and wasn't sure if I needed to update my Deco to be able to be compatible with similar speeds over wifi.
My laptop connected with a Cat8 ethernet cable is reaching speeds of 931.66 mbps download / 935.57 upload (which is great compared to what I had at double the cost!).
However, when using my Deco for Wifi I'm only getting around 517 mbps download / 943 upload - would you advise updating the Deco system to a newer model or is it how I've got it set up currently? (I'm not very techy so that might be the issue, with how I've currently got it configerated).
Currently, I've set it up as follows; 5Ghz Network / Operating mode - Access Point / Fast roaming & Beamforming - enabled.
Let me know your thoughts, would upgrading my Deco give me a similar speed or can I just enhance my current system?
Cheers
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thanks for screenshot and speed test results. Results are dissapointing, indeed. I know Satellite M5 can do better.
When they sell you WiFi mesh and promote its benefits, they skip the part about importance of proper placement of Satellite units. Satellite unit relays WiFi signal from (usually) Main unit, and as such must be placed close enough to Main unit and also close enough to where you need good WiFi from Satellite unit. They (often) give you only very basic tools to see if placement is correct and no help in the app to find what is wrong when it is.
Usually Medium signal should be good enough for better speeds, but perhaps Satellite M5 is close to borderline between Weak and Medium signal.
As such, to help figure better Satellite M5 placement and perhaps how many Deco units you do need downstairs, please run two more tests with same setup of laptop hardwired with Ethernet cable to Satellite M5:
1. Place downstairs Satellite M5 right under the office Main Deco M5. This will be the shortest distance between two Deco units on different floors. Check Signal level, is it still Medium or now Strong, and then run speed test on laptop to see what will be the speed of WiFi backhaul there;
2. Place downstairs Satellite M5 as near TV as possible, ideally on TV stand. Check Satellite M5 Signal level there and also run speed test on laptop there.
Please also tell me the following:
1. What floors and ceilings are made of: wood, concrete, etc.?
2. Brand name and model name of TV. Smart TVs are notorious for bad handling of WiFi mesh, so if you want solid streaming quality on TV its brand and model name could help me to find if there are options to achieve that.
3. When you place Satellite M5 right under office M5 in first test, what is the distance in feet/meters between Satellite M5 and TV, and also are they in direct sight of each other or there are walls between them.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1423
Replies: 11
Voters 0
No one has voted for it yet.