Home Network Community > All Threads > X50-POE - Won't work on POE
< All Threads

X50-POE - Won't work on POE

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

X50-POE - Won't work on POE

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
X50-POE - Won't work on POE
X50-POE - Won't work on POE
2024-01-31 13:44:59 - last edited 2024-01-31 13:46:03
Model: Deco X50 - PoE  
Hardware Version: V1
Firmware Version: 1.2.5 Build 20231122

Hi,

 

Just trying to introduce an X50-POE into my already established network but it causes two issues;

 

1) The access point will not connect using PoE

2) If i use the power adapter and a different cable it takes down the whole network suggesting there is no internet connection leading to me having to disconnect the X50 and reset my broadband router for my M9 & M5 APs to broadcast my SSID

 

thanks

  0      
 
  0      
 
#1
Options
5 Reply
Re:X50-POE - Won't work on POE
2024-02-01 06:34:32 - last edited 2024-02-02 02:32:15

  @moschop21 

Hi, welcome to the community.

May I know the model number of the POE switch that you plan to power on Deco X50-POE?

Can I have a picture of your network topology to display how Deco units are connected, such as?

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:X50-POE - Won't work on POE
2024-02-01 10:14:57

  @David-TP 

 

Thanks for the response.  The switch i use is a D-Link DGS-1008P which is an 8 port (4 PoE) Gigabit switch which until switching to Deco(s) powered my 3 Unifi access points without issue.  Whilst i don't have a network diagram as such the configuration is simply as detailed below;

 

Broadband router---(copper)---> D-Link Switch ---(copper)---> Primary Access Point (Deco M9)---(Radio)---> Secondary Access Points (RF)

 

The plan is to replace the Primary AP with the X50 as the existing cabling from the old Unifi APs is in a better coverage spot but introducing the X50 in any way whether through PoE or powering through the power adapter causes the network to fail and the error suggesting no internet connnection.

 

  0  
  0  
#3
Options
Re:X50-POE - Won't work on POE
2024-02-02 03:06:42

  @moschop21 

Hi, Thanks for the feedback.

If there is a spare Ethernet port on the Broadband router, could you please help me run a simple test:

Adjust the network topology to be:

(It would be great If you could temporarily disconnect the D-Link switch from the network diagram)

 

Broadband router----(copper)---> D-Link Switch---(copper)--->3*Unify APs

                             \---(copper)---> Deco X50-POE(via DC adapter, not POE)

 

I think Deco X50-POE somehow might trigger the network loop detection on the switch.

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options
Re:X50-POE - Won't work on POE
2024-02-04 08:59:36

  @David-TP I have tried the request topology, with just one Unifi, and the same issue occurs.  Is it worth deleting me network and starting again with the X50 as the first AP configured and as the hub?

  0  
  0  
#5
Options
Re:X50-POE - Won't work on POE
2024-02-04 20:00:40 - last edited 2024-02-04 20:01:02

  @David-TP 

hey so just to update and as per my last message I deleted all devices and started again. Six or so hours in and all is stable so it looks like introducing the X50 to an as built network is not the best idea 

  1  
  1  
#6
Options

Information

Helpful: 0

Views: 750

Replies: 5

Related Articles
Deco X50-PoE & X50 Outdoor
188 0
Can the x50 PoE give power?
521 0
About the X50-Poe and M4 Mesh
135 0
Egress Port Deco X50 POE
527 0
My Deco X50-poe keeps reboot
1185 1
X50 PoE Ethernet backhaul does not work
70 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.