M7450 keeps restarting
M7450 keeps restarting
https://community.tp-link.com/en/home/forum/topic/277564 i know that this is old thread, but I have the same problem.
I just bought my M7450 it is keep restarting. What can I do?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, please confirm if there is any trigger to cause the automatic rebooting, such as running speedtest or any other scenario. And how often does it happen usually?
If possible, please try a different SIM card to see if there is still the same issue, let us know who your ISP is and how many client devices are usually connected to the M7450.
- Copy Link
- Report Inappropriate Content
@Sunshine This happens regardless of presence of SIM card. I used polish operator Orange.
BUT I think I found a trigger: restarts happens when router is connected to computer.
When it was alone (no usb connected) - it was up for a long time (I did not notice restart)
When it was powered up from powerbank - also
when I connected it to laptop - it started to restart.
I checked it by
ping -D 192.168.0.1 (-D option adds timestamp in output in linux version of ping ) and saving output to file
then, from analysis of saved file it turned out that router works about 5- 20 minutes, then there is about 2-3 min break (no communication with router) . and cycle repeats.
- Copy Link
- Report Inappropriate Content
Hi, thanks for the reply, may I have the brand and model no. of the computer? and what is the operating system?
When the computer is connected to USB port of the M7450 and when no reboots, is the computer able to access the internet and the M7450 properly?
If the issue can be reproduced easily, I will forward your case to our senior engineer for analysis.
By the way, when did you purchase the M7450 and was it working fine before?
- Copy Link
- Report Inappropriate Content
"may I have the brand and model no. of the computer? and what is the operating system?"
"HP EliteBook 860 16 inch G9 Notebook PC". Strictly speaking firstly I have connected the router through this hub: https://i-tec.pro/en/produkt/u3chargehub16-2 but connected directly to laptop - also restart.
Debian SID.
I might test with Win10 machine but not now.
"When the computer is connected to USB port of the M7450 and when no reboots, is the computer able to access the internet and the M7450 properly?"
I am not sure how to understand your question. If you ask "computer is connected to wifi and has access to internet" then yes, it was no problems.
When you ask if RNDIS interface works - then "I do not know, did not test it" EDIT: yes, also works.
"By the way, when did you purchase the M7450 and was it working fine before?"
Purchased on sunday, got tuesday, 2 days ago, so this is new router.
- Copy Link
- Report Inappropriate Content
Another part of this puzzle:
I have connected router to Windows 10 machine and it keept up for about 30min (so I suspected it is ok)
What was more interesting: I pass usb device (router RNDIS) to Windows VM on my linux laptop, and ... it also does not restart for about 30min.
I was completely confused (especially with this VM case) but I noticed, that both windows machines are automatically put up RNDIS interface and took address from router's DHCP.
So I connected this router to laptop, and brought interface up with addres taken via DHCP from router.
There was no restart for about 1 hour so far.
Stay tuned.
- Copy Link
- Report Inappropriate Content
Thanks a lot for the update, so the device works fine and no auto restarts when connected directly to Windows 10 or Windows VM via USB cable, while if they are connected via a USB hub in between, the device will restart on its own frequently, right?
It is recommended to connect the computer via USB cable directly to use the RNDIS interface, and you could monitor for longer time.
- Copy Link
- Report Inappropriate Content
@Sunshine No. Device restarts when RNDIS interface is not up, regardless of connecting directly or via hub. Last night I left router connected via hub, and interface was up and router did not restart for 10 hours. When I put interface down router started to restarts.
So now simplest way to reproduce:
- take debian[2] distribution with ifupdown suite (no network manager, netplan or similar [1])
- connect router via usb, and left interface down
- wait about 10-15 minutes - router should restart.
[1] with other network suites effect probably will be the same, but I don't use them and I do not know if they are will be trying put interface up automatically, which may hide problems.
[2] of course other distributions also may have this problem, but I do not know how to use them :)
- Copy Link
- Report Inappropriate Content
There is another stupid bug: after reboot device presents
ATTRS{serial}=="0123456789ABCDEF"
instead of real one.
- Copy Link
- Report Inappropriate Content
By "after reboot device presents ATTRS{serial}=="0123456789ABCDEF" instead of real one.", do you mean the device MAC address? Please share with us a screenshot if convenient.
To assist you efficiently, I will forward your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.
- Copy Link
- Report Inappropriate Content
@Sunshine Sorry for being imprecise. By "serial" I meant USB device serial number.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1853
Replies: 15
Voters 0
No one has voted for it yet.