Home Network Community > All Threads > RE220 Issue
< All Threads

RE220 Issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE220 Issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE220 Issue
RE220 Issue
2023-12-09 15:59:23 - last edited 2024-01-29 03:39:07
Model: RE220  
Hardware Version:
Firmware Version:

After months of good performance, it has stopped working. The power light settles for a few seconds before continuing to blink. Then, all lights flash before the power light starts blinking again, and the same cycle repeats itself. Attempts to reset have not been successful. How can I reprogram it? Thanks.

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:RE220 Issue-Solution
2023-12-13 01:39:57 - last edited 2024-01-29 03:39:07

  @DRobC 

Update:

Please refer to the following solution:

RE220/RE200/RE190 Keeps Restarting Automatically

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#7
Options
6 Reply
Re:RE220 Issue
2023-12-11 01:40:34

I have the same problem. It just keep cycling between solid and flashing power led.  Pushing the reset pin does nothing but start the cycle over again. 

  1  
  1  
#2
Options
Re:RE220 Issue
2023-12-11 09:17:59

  @DRobC 

@Brian527 

Hi, Thank you very much for the feedback.

Could you please help me check the SN number on the RE220?

How about the hardware version of the RE220, which you could also find on the product label?

By the way, how long have you had the extenders?

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#3
Options
Re:RE220 Issue
2023-12-11 18:17:45

  @David-TP 

 

Wow that label is small. 
 

serial no: Y2340A7002068

Ver: 3.6 VN1


Purchased July 2023

 

Thanks 

  1  
  1  
#4
Options
Re:RE220 Issue
2023-12-12 02:00:53

  @Brian527 

Hi, Thank you very much for the details. 

Please refer to this link to claim for warranty service:

https://www.tp-link.com/us/support/contact-technical-support/#Warranty-Support

Thank you again and Best regards.

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#5
Options
Re:RE220 Issue
2023-12-12 16:45:44

  @David-TP 

Ver3.6 VN1

S/N: Y2430K8005329

  1  
  1  
#6
Options
Re:RE220 Issue-Solution
2023-12-13 01:39:57 - last edited 2024-01-29 03:39:07

  @DRobC 

Update:

Please refer to the following solution:

RE220/RE200/RE190 Keeps Restarting Automatically

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#7
Options

Information

Helpful: 1

Views: 709

Replies: 6

Related Articles
RE220 on Onemesh
1093 0
Problem configuring RE220
551 0
RE220 stops transmitting
1262 1
RE220 as access point
1291 0
RE220
852 0
RE220 - iOS14 Weak Security
4212 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.