please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!
please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!
2023-11-22 17:15:43
Model: Archer TXE75E  
Hardware Version: V3
Firmware Version:

hi i had fast fibre installed and got a 

Archer TXE75E

AXE5400 Wi-Fi 6E

 

for my pc, but wifi upload speeds are like 0.40 can anyone help

 

the fibre company says its the card as the router is getting full download and upload to it

 

the cards been updated to latest driver too

  0      
  0      
#1
Options
13 Reply
Re:please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!
2023-11-22 17:40:10 - last edited 2023-11-22 17:44:00

  @mark25810 

 

update i went into the properties and advanced mentue and the wireless mode section that says 802.11n/ac/ax wireless mode it was on ax so changed too ac and get just over 100 upload which is best i can get even though have the ultra fast fibre 1000mbps router is in living room downstairs at front of house and pc is upstairs at the back

 

 

UPDATE  tried speed test 5 mins later back to -30 :/

  0  
  0  
#2
Options
Re:please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!
2023-11-22 18:35:24 - last edited 2023-11-22 19:13:43

  @mark25810  so i could not get it to speed up the uploads again so deleted the card and installed again, changed it to that same setting and it worked. changed it back to the other and it stopped and wont do it again now

 

i have found when i first install this card the upload speed on the speed checker shows good..but i do it a 2nd time...the speed checker i mean its back to minus numbers

 

my other wifi 6e card also uses the same stuff as this card and same results

  0  
  0  
#3
Options
Re:please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!
2023-11-22 19:38:13 - last edited 2023-11-22 19:39:02

  @mark25810 

 

Hi,

 

Have you already tried another speedtest website to re-confirm this upload behavior? (just google for "internet speed test" if you don't already have another website on hand)

 

Since you only mention upload speed, does that mean download speed is fine, lets say > 900 Mbps if the computer is close to the router?

 

  0  
  0  
#4
Options
Re:please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!
2023-11-22 19:46:51 - last edited 2023-11-22 19:48:01

  @woozle I Have tried loads the main one being ookla bother the webbased one and the app version

 

well because pc is a distance with this new card i am getting 400 to 500 speed. with the cheap one with the antennas that are fixed to it the speed was only 150 to 200mb so the download speed is increased but the upload speed is minus numbers

 

its the cards or something as my phone sat on the desk upload speeds are ok

 

fibre company will help no more :/

 

also i did attached the moveable antennas of the new one to the cheaper card and it gives the same speed as the new card download wise lol

  0  
  0  
#5
Options
Re:please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!
2023-11-22 19:59:24

  @woozle litterally getting nowhere with tp-link live chat

  0  
  0  
#6
Options
Re:please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!
2023-11-22 20:04:51

  @mark25810 

 

Do I understand this correctly that you have another wifi 6e card that gives the same (bad upload) results? If yes, does that card also use an Intel AX210 M.2 module?

 

What upload speed behavior to you see when using another band, like 2.4 GHz?

 

  0  
  0  
#7
Options
Re:please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!
2023-11-22 20:09:21 - last edited 2023-11-22 20:33:10

  @woozle thats what i change that setting too when i have freshly installed either of the cards and speedtest right after show supload speed working but then a 2nd speedtest right after shows the upload speed back to minus in that setting above though i get nearly 600mbps download which is good but i need to upload things too

 

 

 

 

 

well before yesturday i was with another fibre company but it was via phoneline so upload speed was maybe about 13 but it ran all ok

 

i used that cheaper card i mentioned to you which was ok till this super fast wifi6 fibre. i think so as when i open adapter folder and then open the old wifi card it says....Intel(R) Wi-Fi 6E AX210 160MHz

 

do you think its this type of card or module that does not agree with my pc?

 

maybe i should get a wifi 6 card and not wifi 6e?

 

forgot to say installed the new one again and it says exact same name as the cheaper card lol

 

 

 

  0  
  0  
#8
Options
Re:please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!
2023-11-22 20:35:15

  @mark25810 

 

If the "old" card was shown by Windows as "Intel(R) Wi-Fi 6E AX210 160MHz", then there is no difference to the TXE75E, because it uses exactly the same Intel AX210 module.

So, if both cards showed the same slow upload behavior, then we can assume they are not faulty, because that would be an unbelievable coincidence.

 

Other than trying the lastest available driver (currently at version 22.250.x), i think there is not much that can be done, however.

 

Beside the popular speedtests, have you tested other means of uploading data? Like upload a Youtube video or, even better for testing, copy files from your computer to another device within your home network.

 

The "6E" just means the Wi-Fi card is capable of using the 6 GHz band in addition to the 5 GHz band and the 2.4 GHz band. 
If you bought a Wi-Fi 6 card instead that uses Intel's AX200 module, then you might still face the same problem, as the AX200 and the AX210 are largely the same.

 

  0  
  0  
#9
Options
Re:please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!
2023-11-22 20:41:59 - last edited 2023-11-22 20:44:10

 

i have updated to the latest drivers.

 

makes no sense why there is no upload speed, i actually tried emailing one of my other email addresses some photos, did not send at all so deffo no upload speed there

 

im not tech minded but could my motherboard being older be the issue with the card being plugged in the pci slot

 

the old card worked with my normal slow fibre but with this being wifi6 do you think that could cause anything, saying that downloads are ok so who knows

 

 

 

 

  0  
  0  
#10
Options
Re:please help lol had new 1000mb fibre installed got a Archer TXE75E AXE5400 Wi-Fi 6E uploads zero!
2023-11-22 22:16:49

  @mark25810 

 

If possible test the card in another PCIe slot (provided there is/are any), but I doub't the motherboard being older would be an issue. Just make sure the motherboard BIOS is on the latest available version, as early versions might still have bugs occasionally.
 

Was the previous router you got from the other company a Wi-Fi 5 router?

 

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 1963

Replies: 13

Related Articles