New home mesh network
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
New home mesh network
Hello Everybody!
I have an ax 90 router and I want to create a home mesh network. (The signal amplifier is not enough, because a large area has to be covered) However, I can't really navigate between the devices. The ax 90 is out in my small office, I would take it from there to the house, where I would place 2 deco devices. As I looked, deco 90 would be the right one, but I'm not sure. Do you have any tips to solve it?
Re:New home mesh network
Hi, welcome to the community.
The combination of Archer AX90+2*Deco X90 would work.
The first main Deco X90 needs to be wired into the Archer AX90 and Deco will broadcast its own SSID that would be a different SSID, not the same Mesh work as Archer AX90. Or You could consider turning off the Wireless signal of Archer AX90 and only using Deco to provide a wireless Mesh network for the whole house.
The wireless range extender would also be a good alternative. You could add two range extenders with Archer AX90 to create a OneMesh network, such as:
Archer AX90+2*RE815X or 2*RE900XD
Thank you very much and best regards.
▶Check What's Currently Going on With Deco
▶Deco Starts Supporting Changing Wireless Channels!
Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter
Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More
▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience!
Try to leave a Message if urgent help is required.