0
Votes

Second router as access point Lan/lan or lan/wan and Dhcp as auto ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
 
0
Votes

Second router as access point Lan/lan or lan/wan and Dhcp as auto ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Second router as access point Lan/lan or lan/wan and Dhcp as auto ?
Second router as access point Lan/lan or lan/wan and Dhcp as auto ?
2023-11-14 13:54:50 - last edited 2023-11-16 02:17:00
Model: Archer AX72 Pro  
Hardware Version: V1
Firmware Version: 1.2.2 build 20230831

Using ax72 Pro as access point, I wired main routers Lan to ax72 Wan is this right or should it be lan/lan? Also in the quick setup DHCP is set to auto,  is this ok or will there be a conflict with daily traffic of min 15 devices . Thanks. 

#1
Options
1 Accepted Solution
Re:Second router as access point Lan/lan or lan/wan and Dhcp as auto ?-Solution
2023-11-15 06:48:50 - last edited 2023-11-16 02:17:00

  @Yama23 

 

Hi, your configuration is okay for Archer AX72 Pro, and you could also refer to this guide(Case 1): How to configure the TP-Link wireless router as Access Point

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
#2
Options
5 Reply
Re:Second router as access point Lan/lan or lan/wan and Dhcp as auto ?-Solution
2023-11-15 06:48:50 - last edited 2023-11-16 02:17:00

  @Yama23 

 

Hi, your configuration is okay for Archer AX72 Pro, and you could also refer to this guide(Case 1): How to configure the TP-Link wireless router as Access Point

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
#2
Options
Re:Second router as access point Lan/lan or lan/wan and Dhcp as auto ?
2023-11-15 16:47:05
So LAN main router to WAN access point router is good.
#3
Options
Re:Second router as access point Lan/lan or lan/wan and Dhcp as auto ?
2023-11-16 02:16:40

  @Yama23 

Yama23 wrote

So LAN main router to WAN access point router is good.

 

That is correct.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
#4
Options
Re:Second router as access point Lan/lan or lan/wan and Dhcp as auto ?
2023-11-16 07:50:14
Thank you for the prompt and helpful replies.
#5
Options
Re:Second router as access point Lan/lan or lan/wan and Dhcp as auto ?
2023-11-16 08:54:03

  @Yama23 

 

You are welcome~

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
#6
Options

Information

Helpful: 0

Views: 729

Replies: 5

Voters 0

No one has voted for it yet.