TL-MR6400, verbundenen Geräten feste IP zuweisen
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hallo in die Runde, ist es möglich verbundenen Geräten eine feste IP zuzuweisen.
Leider wird von Zeit zu Zeit die IP der Clients neu zugewiesen und Raspi / Arduino können nicht mehr kommunizieren.
Hello everyone, is it possible to assign connected devices a fixed IP.
Unfortunately, from time to time the clients' IP gets reassigned and Raspi/Arduino can no longer communicate.
Danke für jede Hilfe - ich bin leider recht unbeholfen in der Thematik.
Stefan
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
You could either set static IP address on your client devices, or configure address reserveration on the router.
Address reservation is a feature that allows you to assign a specific IP address to a particular device (identified by its MAC address) on your local network. This can be useful in scenarios where you want to set up port forwarding or simply keep track of a particular device's IP address.
You should be able to see the Address Reservation settings on Advanced -> Network -> LAN Settings page.
For more detailed configuration guide, please refer to this FAQ: https://www.tp-link.com/support/faq/1657/
- Copy Link
- Report Inappropriate Content
It works fine, thank you :-)
Stefan
- Copy Link
- Report Inappropriate Content
You could either set static IP address on your client devices, or configure address reserveration on the router.
Address reservation is a feature that allows you to assign a specific IP address to a particular device (identified by its MAC address) on your local network. This can be useful in scenarios where you want to set up port forwarding or simply keep track of a particular device's IP address.
You should be able to see the Address Reservation settings on Advanced -> Network -> LAN Settings page.
For more detailed configuration guide, please refer to this FAQ: https://www.tp-link.com/support/faq/1657/
- Copy Link
- Report Inappropriate Content
It works fine, thank you :-)
Stefan
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 501
Replies: 3
Voters 0
No one has voted for it yet.