Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > Download rate only 2% of claimed data rate

< All Threads

Download rate only 2% of claimed data rate

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Download rate only 2% of claimed data rate

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TobyH

2023-11-03 18:54:11 - last edited 2023-11-07 09:27:44

Posts: 2

Helpful: 0

Solutions: 1

Stories: 0

Registered: 2023-11-03

Download rate only 2% of claimed data rate

2023-11-03 18:54:11 - last edited 2023-11-07 09:27:44

Model: TL-WPA4220 KIT

Hardware Version:

Firmware Version:

The tpPLC app shows a data rate of ~ 395Mbps. It does vary depending on whether i plug it into wall socket directly or via a power bank - the 395Mbps is shown when connected directly.

I can obtain internet download speeds of around 80 Mbps when using the base router, however the best I can obtain when connected via the extender is around 5 Mbps (over wifi). However I CAN get close to 80 Mbps when using a wired connection between the laptop and powerline adapter.

So the issue seems to lie with the WIFI, not the poweline link.

Any ideas why the wifi performance is so poor (even if I have the laptop next to the adapter) ?

Thanks

1 Accepted Solution

TobyH

LV1

2023-11-07 09:13:30 - last edited 2023-11-07 09:27:44

Posts: 2

Helpful: 0

Solutions: 1

Stories: 0

Registered: 2023-11-03

Re:Download rate only 2% of claimed data rate-Solution

2023-11-07 09:13:30 - last edited 2023-11-07 09:27:44

@Sunshine yes that's right. The issue lies with the Wi-Fi not the power line. I think you're right about the 2.4 ghz. I just bought a pair of Deco P9s which offer 5 ghz and it's working flawlessly.

Recommended Solution

3 Reply

Sunshine

2023-11-07 09:04:49

Posts: 7375

Helpful: 1224

Solutions: 940

Stories: 0

Registered: 2018-12-17

Re:Download rate only 2% of claimed data rate

2023-11-07 09:04:49

@TobyH

Hi, you mean the same laptop gets close to 80Mbps when connect to WPA4220 extender via Ethernet cable but only 5Mbps when connected wirelessly to the same WPA4220 extender, right?

If so, the issue might be caused by wireless interference, the TL-WPA4220 only supports 2.4GHz WiFi which might be crowded especially in city.

Please try to change wireless channel and channel width on the TL-WPA4220 extender to see if it can be improved.

How to customize Powerline Extender’s wireless settings via web-based management interface

If the issue still happens, please check the wireless link speed on the laptop as well:

How to check the associated/link speed on a wireless client

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.

TobyH

LV1

2023-11-07 09:13:30 - last edited 2023-11-07 09:27:44

Posts: 2

Helpful: 0

Solutions: 1

Stories: 0

Registered: 2023-11-03

Re:Download rate only 2% of claimed data rate-Solution

2023-11-07 09:13:30 - last edited 2023-11-07 09:27:44

@Sunshine yes that's right. The issue lies with the Wi-Fi not the power line. I think you're right about the 2.4 ghz. I just bought a pair of Deco P9s which offer 5 ghz and it's working flawlessly.

Information

Helpful: 0

Replies: 3

Download rate only 2% of claimed data rate

Download rate only 2% of claimed data rate

Information

Voters 0

Tags