Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > How to unbrick TP-Link AC750 (C2) after openwrt

< All Threads

How to unbrick TP-Link AC750 (C2) after openwrt

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to unbrick TP-Link AC750 (C2) after openwrt

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WipedLifePotato

2023-09-05 15:52:56 - last edited 2023-10-11 09:40:53

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-09-05

How to unbrick TP-Link AC750 (C2) after openwrt

2023-09-05 15:52:56 - last edited 2023-10-11 09:40:53

Model: Archer C20

Hardware Version:

Firmware Version:

https://forum.openwrt.org/t/the-openwrt-firwmare-is-brick-my-router/170788/17
https://forum.openwrt.org/t/appologize-about-my-past-post/170797

So, I did upload a firmware for an another router for a now I dont see anything tftp connection to 69 port on my fedora server. I remove tftp for a now

Is there exist any way to fix a router without buy a JTAG programmer and very hard things... What for I want to install openwrt only for a vpn support, I have a router with openwrt and a router tp link with vpn support, and I can to see that stock firmware is would better, yet for a now I even can't to upload a stock firmware.

1 Accepted Solution

terziyski

LV7

2023-09-05 17:06:05 - last edited 2023-10-11 09:40:53

Posts: 7142

Helpful: 5361

Solutions: 1220

Stories: 7

Registered: 2013-10-12

Re:How to unbrick TP-Link AC750 (C2) after openwrt-Solution

2023-09-05 17:06:05 - last edited 2023-10-11 09:40:53

@WipedLifePotato

Here's the official procedure for recovering a bricked router. In your case you should use Method 1.

Here's a video guide for the TFTP method.

If these two don't work for you I''m afraid that you'll have to obtain a JTAG programmer.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

Recommended Solution

1 Reply

terziyski

LV7

2023-09-05 17:06:05 - last edited 2023-10-11 09:40:53

Posts: 7142

Helpful: 5361

Solutions: 1220

Stories: 7

Registered: 2013-10-12

Re:How to unbrick TP-Link AC750 (C2) after openwrt-Solution

2023-09-05 17:06:05 - last edited 2023-10-11 09:40:53

@WipedLifePotato

Here's the official procedure for recovering a bricked router. In your case you should use Method 1.

Here's a video guide for the TFTP method.

If these two don't work for you I''m afraid that you'll have to obtain a JTAG programmer.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

Information

Helpful: 0

Replies: 1

How to unbrick TP-Link AC750 (C2) after openwrt

How to unbrick TP-Link AC750 (C2) after openwrt

Information

Voters 0

Tags