@Udhaya 

Udhaya wrote

  @mahat update first latest firmware i give link

https://drive.google.com/file/d/1RelMo__MgVKp0puWvGR7DIebURijEWLp/view?usp=drive_link

File does not exist any more in Google drive. Do you have the latest version firmware with update for BSNL?

  @sasebruh i have downloaded the brazil version, as suggested some where in this post, but still i have failed to activate voice , however my internet connection is working well. it will be great help, if you can forward me the firmware link to try once again (confeder8.international@gmail.com) thanks in advance.

Hi All,

There is no issue with the firmware. I have completed the configuration and made a post about it. Please visit the post using the URL below:

techwave|j2dk|in use dote insterd of | to form the url

It is not allowing me to put the link or snap here

Thanks.

DP

  @Pradeep_R can u plz share the configuration details, my local isp provider is supporting, they suggesting me to buy new router, if u share the configuration it will be usef

  @mahat 
To all who are having configuration issues.

Internet configuration (PPPoE GPON/EPON):
Type: PPPoE

VLAN: Ask LCO or contractor.
Multucast VLAN: Usually disabled but ask to confirm.

Username

Password: *****

MTU: 1460 (best), 1480 (default), 1492 (max)

                  For finding the optimal MTU checkout Ping Test to determine Optimal MTU Size on Router from NetGear. 
NAT, IGMP Proxy enabled.

DNS set: 1.1.1.1; 8.8.8.8; or vice versa

IPv6: Enable only if you get some gateway IP in Internet IPv6 section in the Status page (indicates IPv6 available at BNG).
DNS IPv6 set: 2001:4860:4860::8888; 2606:4700:4700::1111; or vice versa

Telephone Interface (IPoE GPON/EPON):

Type: Dynamic IP
VLAN: Generally 1849 or 1831 / 1830 but ask to confirm.
MTU: 1500 (default, do not change)
NAT, IGMP Proxy enabled.

IPv6: Enable only if you get some gateway IP in Internet IPv6 section in the Status page (indicates IPv6 available at BNG).

Interface Binding: VoIP

Telephony Setup:
Provider: Other
Phone number: +91[std-code][8-digit-landline-no]
Registrar Address: Ask for the address.
Authentication ID: +91[std-code][8-digit-landline-no]
Password: Ask.
SIP Proxy: Ask for the address (same as registrar address).
Outbound Proxy: Ask for the IP or the address.
 

Other setting (iykyk): 

QOS: enabled
DOS Protection enabled & set to high.

Reboot Schdule: Everyday 3am to 6am.
LAN DNS (set manually if you wish).

  @Udhaya Hi , Could you provide the latest firmware link.