New Release Wi-Fi Routers Support DoH and DoT Network
Good news!
We are happy to announce that there is new official firmware rolling out for multiple routers, including the BE, AX, and AC series, which adds DoH and/or DoT. Welcome to upgrade and install this version of firmware to try it out.
This Article Applies to:
| Model & Hardware & Firmware | DoH | DoT | Update Date |
|---|---|---|---|
| Archer BE11000 Pro(US)_V1.6_1.1.0 Build 20240730 and newer versions | √ | √ | Sep 2, 2024 |
| Archer BE700 Pro(US)_V1.6_1.1.0 Build 20240730 and newer versions | √ | √ | Sep 2, 2024 |
| Archer BE700_V1&V1.6_1.1.0 Build 20240926 and newer versions | √ | √ | Nov 18, 2024 |
| Archer BE550 Pro_V1&V1.6_1.1.0 Build 20240730 and newer versions | √ | √ | Sep 2, 2024 |
| Archer BE3600_V1_1.1.0 Build 20240729 and newer versions | √ | √ | Sep 2, 2024 |
| Archer BE230_V1&V1.6_1.1.0 Build 20240729 and newer versions | √ | √ | Sep 2, 2024 |
| Archer AX55(EN)_V1_1.3.3 Build 20240628 and newer versions | √ | √ | Aug 16, 2024 |
| Archer AX55(US/CA/TW)_V1_1.3.2 Build 20240325 and newer versions | √ | √ | -- |
| Archer C80_V1&V2.20_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer C6_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer A6_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer C64_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer A64_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer C86_V1_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer A8_V1&V2.20_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer C59(US)_V4&V4.8_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer AC1900(US)_V1.6_1.13.2 Build 230824 and newer versions | √ | -- | -- |
Moderator Note:
1. The availability of DoH and/or DoT may vary by region even for the same model. Please check your local website for more information.
2. The above list might not include all models and hardware versions. It is recommended to keep watching the firmware releases for your router, as all the newly supported features will be listed in the patch notes if/when it is added to your version.
3. DoH would not be available when the router works in Access Point mode. Visit this FAQ to know more about the difference between Access Point Mode and Router Mode.
Introduction and Configuration
DoH/DoT Introduction
DoH (DNS over HTTPS) and DoT (DNS over TLS) are two methods that enhance the security and privacy of DNS queries in network communications.
DoH encrypts DNS queries within HTTPS traffic, making them indistinguishable from regular web traffic and difficult to monitor.
DoT uses a dedicated TLS connection for DNS messages, ensuring they are secure from eavesdropping and tampering.
DoH/DoT Configuration
You can go to Advanced > Network > Internet page to enable DoH or DoT.
- For AX and BE series, refer to the screenshots below.
- For AC models, refer to this screenshot:
Note: There are 3 built-in DoH Servers: dns.quad9.net, dns.google, and cloudflare-dns.com, you can choose one at a time.
For more details about the DoH and/or DoT configuration, please refer to How to Configure DoH/DoT on a TP-Link Wireless Router.
Comment below if you have any feedback or run into any issues — we’re here to help.
Related Articles:
Pre-Released Firmware Supports DoH and IoT Network for Archer C80 is Ready for Trial
What is DoH and How to use it on TP-Link Wi-Fi Routers?
How to Configure DoH/DoT on a TP-Link Wireless Router
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
When will you support Archer AX53?
- Copy Link
- Report Inappropriate Content
Gopal2020 wrote
@Kevin_Z is there anything to to worried about? I am getting a lot such steam code logs on C64 Firmware Version: 1.13.1 Build 230609 Rel.32076n(5553)
I have Reliance Jio router as main router (India) 192.168.29.1, than made C64 as main router again via NAT (192.168.0.1) to use DoH and than two access point (IP- 0.2 & 0.3) connected to it using wired backhault (AX10 v2 & A6 V3).
Hi @Gopal2020, thank you very much for sharing your thoughts on DoH.
Were you aware of which access or visit triggers this HTTP status code 400? Or is it possible to confirm that?
Generally, this HTTP status code 400 indicates that the server cannot or will not process the request due to something that is perceived to be a client error (for example, malformed request syntax, invalid request message framing, or deceptive request routing).
- Copy Link
- Report Inappropriate Content
You may subscribe to this thread and will be notified when Archer AX53 supports DoH. I will update the thread once there are new models that support DoH.
BTW, AX53 has already supported IoT Network on the latest 1.2.2 version:
https://www.tp-link.com/support/download/archer-ax53/#Firmware
- Copy Link
- Report Inappropriate Content
Hi,
What abut the Wifi6 routers?
AX72,73,80 etc?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kevin_Z hi my wifi not a connect
- Copy Link
- Report Inappropriate Content
Sorry that we have no idea when other models will support DoH or IoT network as of now, but I will check with the related department and update my thread to let you know once there is definite information.
- Copy Link
- Report Inappropriate Content
hAbivxhjcJk wrote
@Kevin_Z hi my wifi not a connect
@hAbivxhjcJk It seems you're reporting a different issue that is off the topic. Please open a new thread and try describing the issue in detail, then we will be happy to assist.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 29937
Replies: 105
Voters 3
