Good news! 

 

We are happy to announce that there is new official firmware rolling out for multiple routers, including the BE, AX, and AC series, which adds DoH and/or DoT. Welcome to upgrade and install this version of firmware to try it out.

 

 

This Article Applies to:

Model & Hardware & Firmware	DoH	DoT	Update Date
Archer BE11000 Pro(US)_V1.6_1.1.0 Build 20240730 and newer versions	√	√	Sep 2, 2024
Archer BE700 Pro(US)_V1.6_1.1.0 Build 20240730 and newer versions	√	√	Sep 2, 2024
Archer BE700_V1&V1.6_1.1.0 Build 20240926 and newer versions	√	√	Nov 18, 2024
Archer BE550 Pro_V1&V1.6_1.1.0 Build 20240730 and newer versions	√	√	Sep 2, 2024
Archer BE3600_V1_1.1.0 Build 20240729 and newer versions	√	√	Sep 2, 2024
Archer BE230_V1&V1.6_1.1.0 Build 20240729 and newer versions	√	√	Sep 2, 2024
Archer AX55(EN)_V1_1.3.3 Build 20240628 and newer versions	√	√	Aug 16, 2024
Archer AX55(US/CA/TW)_V1_1.3.2 Build 20240325 and newer versions	√	√	--
Archer C80_V1&V2.20_1.13.2 Build 230824 and newer versions	√	--	--
Archer C6_V4_1.13.2 Build 230824 and newer versions	√	--	--
Archer A6_V4_1.13.2 Build 230824 and newer versions	√	--	--
Archer C64_V4_1.13.2 Build 230824 and newer versions	√	--	--
Archer A64_V4_1.13.2 Build 230824 and newer versions	√	--	--
Archer C86_V1_1.13.2 Build 230824 and newer versions	√	--	--
Archer A8_V1&V2.20_1.13.2 Build 230824 and newer versions	√	--	--
Archer C59(US)_V4&V4.8_1.13.2 Build 230824 and newer versions	√	--	--
Archer AC1900(US)_V1.6_1.13.2 Build 230824 and newer versions	√	--	--

 

Moderator Note:

1. The availability of DoH and/or DoT may vary by region even for the same model. Please check your local website for more information.
2. The above list might not include all models and hardware versions. It is recommended to keep watching the firmware releases for your router, as all the newly supported features will be listed in the patch notes if/when it is added to your version.

3. DoH would not be available when the router works in Access Point mode. Visit this FAQ to know more about the difference between Access Point Mode and Router Mode.

 

 

Introduction and Configuration

 

DoH/DoT Introduction

DoH (DNS over HTTPS) and DoT (DNS over TLS) are two methods that enhance the security and privacy of DNS queries in network communications.

DoH encrypts DNS queries within HTTPS traffic, making them indistinguishable from regular web traffic and difficult to monitor.

DoT uses a dedicated TLS connection for DNS messages, ensuring they are secure from eavesdropping and tampering.

 

DoH/DoT Configuration

You can go to Advanced > Network > Internet page to enable DoH or DoT.

 

• For AX and BE series, refer to the screenshots below.

 

• For AC models, refer to this screenshot:

Note: There are 3 built-in DoH Servers: dns.quad9.net, dns.google, and cloudflare-dns.com, you can choose one at a time.

 

For more details about the DoH and/or DoT configuration, please refer to How to Configure DoH/DoT on a TP-Link Wireless Router.

 

Comment below if you have any feedback or run into any issues — we’re here to help.

 

 

Related Articles:

Pre-Released Firmware Supports DoH and IoT Network for Archer C80 is Ready for Trial

What is DoH and How to use it on TP-Link Wi-Fi Routers?

How to Configure DoH/DoT on a TP-Link Wireless Router