AX10 latest firmware slow 5gz
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
After updating to the latest easymesh firmware 5ghz wifi connects at 300mbps instead of 1200mbps even with AX devices.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@sd452 and rebooting the router fixes the standard mess temporarily untill it sh!ts itself again
And while ax ac does works speeds on it are less than before for me
I am going to downgrade the firmware
- Copy Link
- Report Inappropriate Content
Hi, May I know if you have any EasyMesh extenders etc. and built the EasyMesh network?
If not, please make sure Smart Connect is disabled and set a different WiFi name for the 5GHz WiFi on Advanced->Wireless->Wireless Settings page, then make sure you are connected to the 5GHz WiFi near the router and check the wireless link speed.
For comparison, please also connect to a different 5GHz WiFi and check the wireless link speed again.
How to check the associated/link speed on a wireless client
If the problem still exists, please also try to change the 5GHz WiFi channel on the router to see if it makes any difference.
- Copy Link
- Report Inappropriate Content
Hi, do you mean the 5GHz wireless link speed is only 300Mbps as well?
When the 5GHz link speed is normal, please let us know the wired internet speed, 5G internet speed and also 5G link speed for comparison.
- Copy Link
- Report Inappropriate Content
I have already downgraded to previous version but from what i recall ,
All clients were showing wifi and 4xx mbps link speed of which 2 were wifi client and 3 were wifi 5
On the router side i keep 2.4ghz disbaled and 5ghz on a/n/ac/ax.
Turning off - on wifi on clients did not solve the problem, all clients still reconnected on 4xx link speed
Rebooting the router however did solved it for a day
Wifi 6 clients showed 1200mbps and wifi 6 after ax10 rebooted.
Wired clients were unaffected.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 1169
Replies: 5
Voters 1
