Home Network Community > All Threads > Can the power adapter kit TL-WPA8631P be incorporated or cloned into my Deco mesh system
< All Threads

Can the power adapter kit TL-WPA8631P be incorporated or cloned into my Deco mesh system

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can the power adapter kit TL-WPA8631P be incorporated or cloned into my Deco mesh system

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can the power adapter kit TL-WPA8631P be incorporated or cloned into my Deco mesh system
Can the power adapter kit TL-WPA8631P be incorporated or cloned into my Deco mesh system
2023-07-04 10:19:27 - last edited 2023-07-12 06:33:39
Tags: #Wi-Fi Clone
Model: TL-WPA8631P KIT  
Hardware Version:
Firmware Version:

Hi, I have recently set up a Deco mesh using 3 x Xe75 pro.  I wish to add two EAP 110 access points which will not be within ethernet cable range, so I have to use power adapters.

 

I am currently using my old Devolo 500 extenders which aren't giving good speeds.  Ideally I would like to add TP link adapters which are compatible with Deco mesh.

 

My question is; will I be able to clone the TL-WPA8631P units to the same SSID as the mesh, and should I expect better performance with these units over the Devolo 500s?

 

I realise that the TL-WPA8631P kit will only give me one extender. Rather than buying two TL-WPA8631P and throwing away the extra "base station" unit, I was considering adding in the TL-PA8010P kit which are non-wifi units. Could these units also be cloned to the mesh?

 

Thanks in advance

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Can the power adapter kit TL-WPA8631P be incorporated or cloned into my Deco mesh system -Solution
2023-07-05 08:43:48 - last edited 2023-07-12 06:33:39

  @Hashi101 

 

Hi, TL-WPA8631P KIT or TL-PA8010P KIT could work with your Deco units, but they will not build a Mesh network, that is to say, you could connect a powerline adapter to the Deco router via Ethernet cable, another powerline adapter/extender could connect to other client devices of EAPs, but the powerline extender will have its own wireless network, you could customize its wireless network name and password to be the same as the Deco WiFi, but they are not Mesh network.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  3  
  3  
#2
Options
3 Reply
Re:Can the power adapter kit TL-WPA8631P be incorporated or cloned into my Deco mesh system -Solution
2023-07-05 08:43:48 - last edited 2023-07-12 06:33:39

  @Hashi101 

 

Hi, TL-WPA8631P KIT or TL-PA8010P KIT could work with your Deco units, but they will not build a Mesh network, that is to say, you could connect a powerline adapter to the Deco router via Ethernet cable, another powerline adapter/extender could connect to other client devices of EAPs, but the powerline extender will have its own wireless network, you could customize its wireless network name and password to be the same as the Deco WiFi, but they are not Mesh network.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  3  
  3  
#2
Options
Re:Can the power adapter kit TL-WPA8631P be incorporated or cloned into my Deco mesh system
2023-07-05 14:31:24

  @Sunshine Thanks for your helpful reply!  Are you able to comment on whether I would get a better signal to the EAP using the TL-WPA8631P versus my existing Devolo 500 power adapter?  My modem is a 4g LTE only providing about 80 Mbps download.

 

  0  
  0  
#3
Options
Re:Can the power adapter kit TL-WPA8631P be incorporated or cloned into my Deco mesh system
2023-07-11 01:38:08

  @Hashi101 

 

Hi, it is recommended to connect a computer to your existing Devolo 500 power adapter and test internet speed, if it is near 80Mbps download already, it means the speed is not limited by the Devolo 500 power adapter. If it is much slower than your modem/router speed, you could test the front device speed one by one to identify where the issue is.

 

If the issue is confirmed to be with the Devolo 500 power adapter, then maybe changing it to WPA8631P might help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1087

Replies: 3

Tags

Wi-Fi Clone
Related Articles
TL-WPA8631P Kit Firmware update
1485 0
Fritz.Box und TP-Link TL-WPA8631P Kit
953 0
Pair 2 Kits TL-WPA8631P KIT
456 0
tl-wpa8631p ports?
605 0
TL-WPA8631P KIT(EU) firmware for TL-WPA8631P(EU)
884 0
2x TL-WPA8631P (adding TL-WPA8631P to a TL-WPA8631P KIT)
1407 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.