Speed drop until reboot
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have a pair of powerlines on the same circuit. When I turn on i test on my tv down speed of 80mbs up 20mbs but roughly after 5 minutes of tv off, and test again, the download falls to 4mbs, but the upload is still ok at 20. I power cycle one of the adapters and it will bring back up to full download again. I have used the tpPLC to turn of powersaving on both adapters, and it appears that the firmwares are up to date. I can't think of anything else, but that one of them or both are dropping in to some lower power state. Any suggestions to what I havent already tried?
@Sunshine Thanks for reply. Router download taps out at 80Mbps download and its consistent. I'm happy with the feed in to the adapter is good. Link speed between the pair is 200-300Mbps and even showing this link speed, until I reset either one, after time as said, it taps out at about 4Mbps. Both adapters are on same circuit one room apart, plugged directly in to wall and the receiving adapter has 1 device connected and thats the TV. And to test its not the tv being wierd, without reset in its limp condition I unplugged the cable from tv directly to laptop and speed test from different websites give same 4Mbps result.
