Home Network Community > All Threads > Why does my TP-Link RE450 v4 query to DNS to domain a root-servers ?
< All Threads

Why does my TP-Link RE450 v4 query to DNS to domain a root-servers ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Why does my TP-Link RE450 v4 query to DNS to domain a root-servers ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Why does my TP-Link RE450 v4 query to DNS to domain a root-servers ?
Why does my TP-Link RE450 v4 query to DNS to domain a root-servers ?
2023-05-06 01:45:00
Tags: #dns
Model: RE450  
Hardware Version: V4
Firmware Version: 1.0.20 Build 230213 Rel.55420n (8583)

Hello,

I have noticed that my Extender RE450 version 4, working in Repeater mode, makes queries every 9 seconds to the DNS server, pointing to the domain a root-servers net

(I removed the dots on purpose, since this forum did not allow me to send the post with links).

 

Why does this happen?


How can it be stopped? I have searched all the interface options on the RE450, but there is nothing that can do this.

The RE450 is working in Repeater mode, with a fixed IP, 192.168.3.13 and with DHCP turned off.

 

I will appreciate your help.

 

Thank you.

 

I attach a graph of the last connections to the DNS, and also another graph with the total number of connections to the DNS that the RE450 is making in 2 days.

 

SergIo M.

 

 

  0      
 
  0      
 
#1
Options
7 Reply
Re:Why does my TP-Link RE450 v4 query to DNS to domain a root-servers ?
2023-05-08 02:43:42

Hi, any news about this? Thanks

  0  
  0  
#2
Options
Re:Why does my TP-Link RE450 v4 query to DNS to domain a root-servers ?
2023-05-08 02:52:45

  @SergioMC22 

 

Hi, the DNS queries are used to check and monitor internet status of the extender, so that correct internet status can be displayed. And I am afraid it cannot be disabled. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#3
Options
Re:Why does my TP-Link RE450 v4 query to DNS to domain a root-servers ?
2023-05-09 04:24:06

  @Sunshine Hello, but I have a TPLINK RE505X repeater, and this equipment does not present this behavior.
Only the RE450 behaves like this. Because?

  0  
  0  
#4
Options
Re:Why does my TP-Link RE450 v4 query to DNS to domain a root-servers ?
2023-05-09 09:46:26

  @SergioMC22 

 

Hi, may I know where and how did you do the packets capture to check the DNS queries from the extender?

Are the RE450 V4 and RE505X connected to the same router wirelessly? If possible, please provide your network topology as well. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#5
Options
Re:Why does my TP-Link RE450 v4 query to DNS to domain a root-servers ?
2023-05-14 02:05:52

  @Sunshine Hello

RE450 V4 and RE505X are connected to the same router (Archer AX10).

The only difference is that RE450 V4 is connected as Repeater via 5GHz, and RE505X is connected as Access Point.

 

About the query DNS: I'm using a PI-Hole system on my network, and there I see the RE450 V4 queries, filtering the RE450 V4 IP address.

 

  0  
  0  
#6
Options
Re:Why does my TP-Link RE450 v4 query to DNS to domain a root-servers ?
2023-05-15 07:24:22

  @SergioMC22 

 

Hi, normally AP mode should have those DNS queries as well, if the RE505X AP mode could display the internet status correctly, there must be the DNS queries as well.

 

Please don't worry about the DNS queries on the RE450, as it is a normal behavior.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#7
Options
Re:Why does my TP-Link RE450 v4 query to DNS to domain a root-servers ?
2023-05-15 12:32:56

  @Sunshine Hi, thanks for your reply

But I don't think this a regular behaviour.

The RE450 v4 each 9 seconds, query to a root-server (dot) net

 

My question is why this happens?

On my entire network, the RE450 is the number 1 equipment to query to the WEB.

 

 

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 846

Replies: 7

Tags

dns
Related Articles
tp-link re450 v4 soc
751 0
Link RE450 to TP Cloud
945 0
No DNS response from RE450
972 0
TP Link RE450
474 0
Why does my TP-Link Archer A5 query to DNS root server?
3069 0
TP-Link RE450 with Helium Miner Sensecap M1
3955 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.