WiFi router not working Archer C64
Hi there, I recently bought TP link Archer C64. It worked well for 2 days. So, after working for 2 days, on the third day, No led was blinking and whenever I turn off and on the power source, all LEDs blink at once and the internet symbol led is red and then again back to dead. I have tried in multiple power ports etc. Unable to diagnose what's the issue, please let me know.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @c341nn
Thank you for posting on the TP-Link Community.
If the router can no longer be powered on, please check the below suggestions and proceed:
1. Please be sure you are using the original power adapter, and ensure that the power button on the back has turned on.
2. You may try another power adapter with the same power specification, which is 12V = 1A.
3. Try to reset it by holding the reset button for 10s or longer to see if it will change anything.
4. Is there any power outage/bad weather before it stops working?
If nothing helps, it's suggested to contact the local tech support to be advised further:
https://www.tp-link.com/support/contact-technical-support/#Hotline-Support
- Copy Link
- Report Inappropriate Content
Hello @c341nn
Thank you for posting on the TP-Link Community.
If the router can no longer be powered on, please check the below suggestions and proceed:
1. Please be sure you are using the original power adapter, and ensure that the power button on the back has turned on.
2. You may try another power adapter with the same power specification, which is 12V = 1A.
3. Try to reset it by holding the reset button for 10s or longer to see if it will change anything.
4. Is there any power outage/bad weather before it stops working?
If nothing helps, it's suggested to contact the local tech support to be advised further:
https://www.tp-link.com/support/contact-technical-support/#Hotline-Support
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 1514
Replies: 1