Could not able to access the pc(gigabit port) wired to wr841n using a remote desktop connection
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Router: Tplink wr841n v14
PC: Dell optiplex 3050 with gigabit ethernet
PC is connected wirely to one of the router port
Issue: Could not able to access the dell optiplex pc using microsoft remote desktop connection from another pc
Note: the same setup when used with dlink dir 615 x1 router is working seamlessly.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @vidyasagar
Thank you for posting on the TP-Link Community.
Since you're trying to remotely access the local computer from an outside network, you will need to do a Port Forwarding on the WR841N router first. Follow the guide below to open TCP port 3389 on the WR841N:
Port forwarding: how to set up virtual server on TP-Link wireless router?
When proceeding with the Port Forwarding on the WR841N, please make sure you've received a public IP address on the WAN page from your internet provider. If not, you need to contact your provider to help with a public IP first.
After finishing the Port Forwarding settings on the WR841N, you can try to do a remote connection from an outside network with the public IP address.
Go through the following steps to enable the Remote Desktop on your computer:
- Copy Link
- Report Inappropriate Content
Hello @vidyasagar
Thank you for posting on the TP-Link Community.
Since you're trying to remotely access the local computer from an outside network, you will need to do a Port Forwarding on the WR841N router first. Follow the guide below to open TCP port 3389 on the WR841N:
Port forwarding: how to set up virtual server on TP-Link wireless router?
When proceeding with the Port Forwarding on the WR841N, please make sure you've received a public IP address on the WAN page from your internet provider. If not, you need to contact your provider to help with a public IP first.
After finishing the Port Forwarding settings on the WR841N, you can try to do a remote connection from an outside network with the public IP address.
Go through the following steps to enable the Remote Desktop on your computer:
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Sorry my bad, Am trying to access the remote pc from the local network not from the outside network. Will the same settings what you mentioned above will work from the local network?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Can you draw me a detailed network layout? How are the PCs connected to the network, and how would like to access from one to another? Thanks.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kevin_Z
Have you read the issue posted recently?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1130
Replies: 8
Voters 0
No one has voted for it yet.