Home Network Community > All Threads > tp-link DDNS configuration
< All Threads

tp-link DDNS configuration

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

tp-link DDNS configuration

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
tp-link DDNS configuration
tp-link DDNS configuration
2023-01-05 21:05:29 - last edited 2023-01-17 16:09:31
Tags: #DDNS
Model: Archer AX1800  
Hardware Version: V1
Firmware Version: 1.3.5 Build 20211231 rel.53949(4555)

Hi!

I am writing to you with a bit weird case, I need to ping my router from other networks to know whether it is on or off
For this, I`m trying to configure DDNS address with tp-link service provider because I`m using dynamic ip connection type.

While connected to the router wi-fi I can use ping with ddns name, but it doesn't work from other networks (I use 2ip. me/en/services/ip-service/ping-traceroute for test)

Please be aware I`m newbie with routers and network smiley

 

Thank you, best regards!

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:tp-link DDNS configuration-Solution
2023-01-06 20:22:01 - last edited 2023-01-17 16:09:31

  @YevheniiKu 

 

Yes, that's a so called CG-NAT (100.84.X.Y). The only option you have is to contact your ISP and ask for an option to have your public IP address (188.163.X.Y) on your AX1800 WAN port.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  3  
  3  
#7
Options
6 Reply
Re:tp-link DDNS configuration
2023-01-06 00:38:57 - last edited 2023-01-06 02:01:15

  @YevheniiKu 

 

1) Make sure that your Internet IP address is public, i.e. not in the ranges:

 

10.0.0.0 – 10.255.255.255

172.16.0.0 – 172.31.255.255

192.168.0.0 – 192.168.255.255

100.64.0.0 – 100.127.255.255

 

 

2) Make sure that you've enabled ping packets through the router's firewall on WAN port:

 

 

3) Make sure that the DDNS address you've registered resolves to the Internet IP address from the 1-st step.

 

If all these conditions are met and you still can't ping your DDNS address then probably the reason is that your ISP restricts echo requests or the website you're trying to ping from has issues.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  4  
  4  
#2
Options
Re:tp-link DDNS configuration
2023-01-06 01:08:36

  @terziyski Unfortunately this doesn't help, IP is public and ping is enabled

  0  
  0  
#3
Options
Re:tp-link DDNS configuration
2023-01-06 05:56:30 - last edited 2023-01-06 15:46:36

  @YevheniiKu 

 

''While connected to the router wi-fi I can use ping with ddns name, ..." - When you do that, does the replying IP address match the Internet IP address from step 1 and it's not in the ranges I posted ?

If it is in these ranges then your Internet IP address is a private IP address and that's the reason you can't ping it from outside your LAN.

If you give some more details about your network infrastructure, it would be easier to help you:

Which Service Provider are you using for DDNS (like TP-Link, No-IP, DynDNS) ?

Do you have any other device connected before AX1800 (like ISP modem/router) ?

What's your AX1800 Internet IP address first octet (like 192.X.Y.Z) ?

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#4
Options
Re:tp-link DDNS configuration
2023-01-06 15:25:23 - last edited 2023-01-06 18:36:02

  @terziyski No, they are not the same. My internet IP starts with 100.83. and the replying IP address with 188.163.
The service provider is TP-Link. I have no other equipment, at least at my apartment, and have no idea how ISP connected to the building

  0  
  0  
#5
Options
Re:tp-link DDNS configuration
2023-01-06 18:39:30

  @terziyski I have just seen your edited range in the first reply if my internet IP starts with 100.84. it is private? And don't match the IP mapped to DDNS
Any suggestions how to fix this

  0  
  0  
#6
Options
Re:tp-link DDNS configuration-Solution
2023-01-06 20:22:01 - last edited 2023-01-17 16:09:31

  @YevheniiKu 

 

Yes, that's a so called CG-NAT (100.84.X.Y). The only option you have is to contact your ISP and ask for an option to have your public IP address (188.163.X.Y) on your AX1800 WAN port.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  3  
  3  
#7
Options

Information

Helpful: 0

Views: 3010

Replies: 6

Tags

DDNS
Related Articles
DDNS configuration
1306 0
DDNS TP-Link
543 0
TP-Link ID
828 0
configure router to allow ddns behind
932 0
OpenVPN config to an email and custom DDNS
286 3
Archer VR2100: TP-Link DDNS
1615 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.