M7200 cannot connect to Car because WPA2 Issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

M7200 cannot connect to Car because WPA2 Issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
M7200 cannot connect to Car because WPA2 Issue
M7200 cannot connect to Car because WPA2 Issue
2022-12-18 13:19:45 - last edited 2022-12-22 16:23:33
Tags: #m7200
Model: M7200  
Hardware Version: V3
Firmware Version: 3.0.5 Build 220419 Rel 1012n

Hi 

 

I opened this new thread because a previous one from another user was closed without any solution.

https://community.tp-link.com/en/home/forum/topic/247988?page=1

 

My Firmware is up to date ( ISP is up to date as well )

 

 

 

My Wireless setting are set to AES 

 

 

 

Still my Volvo V90 (2017 ) considers this as TKIP WPA  and won't connect. 

It does even not "remembers" this connection so there is even no profile to delete and retry after changing the settings.

 

I think there shlould be a option to select WPA2 AES only i ( instead of WPA-PSK / WPA2 AES combination as you can see in image above )

From other posts I think this is not a volvo only issue but other cars had the same problem. 

You should indicate somehow that this device is not compatible with ( some ) cars.

 

The fact that this issue is reported almost a year ago and not taken serious is antother disappoinment in tp link.

I can consider to buy the more expensive M7450 of M7650 version , But at this point I cannot trust this products to work.

 

Kind regards

 

  0      
  0      
#1
Options
2 Accepted Solutions
Re:M7200 cannot connect to Car because WPA2 Issue-Solution
2022-12-19 07:14:50 - last edited 2022-12-22 16:26:09

  @Volvo_seko 

 

Hi, please install the following firmware for your M7200(EU) V3:

M7200(EU)_V3_220812

 

After that, please select WPA2 AES only to see if it will solve the problem.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:M7200 cannot connect to Car because WPA2 Issue-Solution
2022-12-22 16:23:27 - last edited 2023-05-17 12:05:42

Hi  @Sunshine 

 

Thanks for helping me out and your swift response.

And ....the update of this firmware solves my problem blush !!

Updating the firmware + selecting WPA2 AES only

 

Hopefully this will help other Volve drivers as well who don't have a build in modem.

 

Recommended Solution
  0  
  0  
#3
Options
3 Reply
Re:M7200 cannot connect to Car because WPA2 Issue-Solution
2022-12-19 07:14:50 - last edited 2022-12-22 16:26:09

  @Volvo_seko 

 

Hi, please install the following firmware for your M7200(EU) V3:

M7200(EU)_V3_220812

 

After that, please select WPA2 AES only to see if it will solve the problem.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:M7200 cannot connect to Car because WPA2 Issue-Solution
2022-12-22 16:23:27 - last edited 2023-05-17 12:05:42

Hi  @Sunshine 

 

Thanks for helping me out and your swift response.

And ....the update of this firmware solves my problem blush !!

Updating the firmware + selecting WPA2 AES only

 

Hopefully this will help other Volve drivers as well who don't have a build in modem.

 

Recommended Solution
  0  
  0  
#3
Options
Re:M7200 cannot connect to Car because WPA2 Issue
2023-05-17 06:33:14

This problem could be related to compatibility or settings. Here are a few troubleshooting steps you can try:

  1. Verify compatibility: Ensure that your M7200 device supports the same Wi-Fi standards and encryption protocols (including WPA2) as your car's Wi-Fi system. If there is a garage, you may need to consider alternative connectivity options.

  2. Check Wi-Fi settings: Make sure that your M7200 device is configured to connect to WPA2-secured networks. You may need to adjust the Wi-Fi settings on the device to match the car's network requirements.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1020

Replies: 3

Tags

m7200
Related Articles